Preparation For Taking Pictures
Important
In the event of malfunction or damage, it is possible that data may be lost. Konica can not accept responsibility in any way for such data loss.
Always
When using SD Memory Cards on a PC, do not change the
Do not change the file names or the directory name of image data saved on an SD Memory Card using a PC or save files other than image data taken by this camera. Images that have been changed or added will not only play back on the camera but may cause the camera to malfunction as well.
Always format SD Memory Cards using this camera. A card formatted in a PC may not operate properly.
The SD Memory Card includes a
Sliding this switch downward prevents data from being written to the card and images, etc. saved on the card are protected. Please note that pictures cannot be taken or deleted when the writeprotect switch is on.
When using a
20
Setting Up Functions Before Taking Pictures
Under Shooting Mode ( 
)
Please set the Mode Dial at Shooting Mode ( 
) before setting up the below functions.
Setting Up Focus Range
Before you take pictures, please make sure you set the Focus Switch at the correct focus range or the image may not be clear.
a. Macro ( | ): 0.18m~0.25m |
|
b. Portrait ( | ): 0.8m~1.3m |
|
c. Normal( | ): 1.3m~infinity |
|
If the Focus Switch is set at ( ) or ( ), the symbol of ( | ) on | |
the TFT LCD monitor indicates the focus is not set at normal focus
range.
Turning On Or Off The TFT LCD Monitor (Preset : On status) The TFT LCD Monitor is automatically turned on when the camera is switched on. With the LCD Button, you can turn on or off the TFT LCD monitor.
Setting Up Flash Mode (Preset : Auto Flash mode)
There are five flash modes shown below(Use Down ( 
)Direction Button to slect):
a.Auto flash( 
): The camera will identify the necessity of using the flash. If the environment is too dark the flash will fire automatically.
b.Auto flash with 
): The camera will identify the necessity of using the flash to reduce the occurrence of
symptom in the image.
c.Night scene ( 
): The shutter speed will become slow in order to catch more light to make good images in low light circumstances.
Under this mode, it is suggested to use a tripod to make sure the camera is held still while taking the picture.
d.Fill-in-flash( 
): The flash will fire in any light circumstances.
e.Flash off ( 
): The flash will not fire in any light circumstances.
21