Downloading Image(s) Onto Your PC
Downloading Image(s) Through Ulead Photo Explorer
Error Message Table
Message | Cause | Solution |
1.Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera.
2.Start Ulead Photo Explorer 7.0 SE Platinum .
3.Click File \ Download From Memory Card to get the stored image(s).
There is insufficient card
CARD FULLmemory capacity to store an image.
There is insufficient internal
MEMORY FULL memory capacity to store an image.
Delete the stored image(s) in the memory card or insert a new memory card.
Delete the stored image(s) in the flash memory.
CARD LOCKED | The SD card is under | Set the card protection switch at | |
(CARD ICON | |||
protection. | |||
blinking) | |||
|
| ||
LOCK | The Image can't be deleted | Unlock the protected image | |
under protection. | (please see page19). | ||
| |||
| There is no image stored in |
| |
NO IMAGE | the memory card or |
| |
| flash memory. |
|
FILE ERROR
MEMORY ERROR
CARD ERROR
The environment is too dark
LOW LIGHT!
with "Flash Off" mode.
HAND SHAKE ICON The environment is too dark
( | ) | with "Flash Off" mode. |
Delete this image and take the picture again.
Format the flash memory (see page18).
Insert a new memory card.
Set the flash mode at Auto Flash or
Set the flash mode at Auto Flash or
64
65