LG Electronics LVC-SX703PC/OC/MC, LVC-SX703PB/OB/MB instruction manual Day/Night Setting

Page 28

LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 28

Day/Night Setting

	MENU
LANGUAGE	ENGLISH
CAMERA ID	OFF
EXPOSURE
WHITE BAL	ATW
DAY/NIGHT	AUTO
MOTION DET	OFF
PRIVACY MASK
SPECIAL
INITIAL SET	OFF
EXIT
EXIT

It is a function of a color camera to delete the filter with the IR Cut function in an illumination below the standard value so that it has a better sensitivity.

1.Select [DAY/NIGHT] option on the [MENU] screen.

2.Use or button to select one of four modes for day/night function.

AUTO: The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough.

EXT : Switches between color picture and black-and-white pic- ture when an external day/night switching signal is received. NIGHT: Black-and-white mode enabled.

DAY: Color mode enabled.

Note:

The AUTO mode is not available if AGC mode is set to [OFF] or SHUTTER mode is set to a fixed mode.

28

Image 28

Contents Color Video Camera LVC-SX703PB/OB/MBRisk of Electric Shock Do not Open Important Safety Instructions Manufacturer Contents and Features Features Chart Power SourceIs operated with Line lock mode Remove dust or dirt on the surface of the lens with a blowerInstalling a lens sold separately Part Names and FunctionsLens mount cap Bracket can be fixed at the top or bottom of the camera.Power indicator Power input terminalExternal Device Connectors RS-485 Connector ALC Lens Setting Switch Lens iris output connector LensButtons for menu Tons on the side panel.Connecting the monitor Insert the plug of this power cord into a wall outletConnections Basic connectionMounting the Lens Mount type lensConcerning Auto-Iris Lenses DC type auto-iris lensVideo type auto-iris lens ELC type auto-iris lensAlarm Connection External Device ConnectionsRS-485 Connection Multi-Input ConnectionFlange-back Adjustment Installation of Camera Menu Operation To Open and Exit the Menu screen Exit the menu screenLanguage Setting Language and Camera Identification SettingsCamera Identification Setting Brightness Setting Exposure SettingsYou can set the brightness level levels Automatic Gain Control AGC setting ExposureFlickerless Setting Flikerless Shutter Speed Setting ShutterUse for removing the flicker of picture BLC/WDR Setting You can set the exposure options using the Exposure menuUse BLC/WDR option to set the options for BLC or WDR camera Use or button to select BLC/WDR optionBLC/WDR User Level Area Bottom White Balance Settings Setting the WB White Balance Mode WB Mode Push Auto Day/Night Setting Motion Detector Setting Motion DET Sensitivity Detection AreaCondition Privacy Masking Setting Privacy MaskSpecial Menu Settings SpecialSetting the digital effect Effect Effect OFFNaming the camera USER-TITLE Setting the digital zoom D-ZOOMRepeat to set the remain characters Setting the title display Setting the HOT KEYSynchronization Setting Sync Setting the Pix Mapping Commands Stop command is 0xC5, 0x5F, 0x0C, 0x00, ID, C.SRS-485 Protocol Data Communication FormatSpecifications Electric Shutter 50 1/100,000 Auto Mode White Balance Power ConsumptionStorage Temperature Weight