LG Electronics LVC-SX703PB/OB/MB, LVC-SX703PC/OC/MC instruction manual Flange-back Adjustment

Page 15

LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 15

Flange-back Adjustment

The adjustment is required only when a lens with- out focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and focus that is more accurate is needed.

flange-back fixing screw

flange-back adjusting ring

1Loosen the flange-back fixing screw on the flange-back adjusting ring.

2.Turn the flange-back adjusting ring to obtain a focused point while watching the monitor screen.

3.Tighten the flange-back fixing screw on the flange-back adjusting ring.

Caution:

Tightening the screw by force will cause damage to the screw or deviation of focus.

Note: The object may be out of focus when using a source of near-infrared light than using the visible light.

15

Image 15

Contents LVC-SX703PB/OB/MB Color Video CameraRisk of Electric Shock Do not Open Important Safety Instructions Manufacturer Contents and Features Power Source Features ChartRemove dust or dirt on the surface of the lens with a blower Is operated with Line lock modeBracket can be fixed at the top or bottom of the camera. Installing a lens sold separatelyPart Names and Functions Lens mount capPower input terminal Power indicatorExternal Device Connectors RS-485 Connector Tons on the side panel. ALC Lens Setting SwitchLens iris output connector Lens Buttons for menuBasic connection Connecting the monitorInsert the plug of this power cord into a wall outlet ConnectionsMount type lens Mounting the LensELC type auto-iris lens Concerning Auto-Iris LensesDC type auto-iris lens Video type auto-iris lensMulti-Input Connection Alarm ConnectionExternal Device Connections RS-485 ConnectionFlange-back Adjustment Installation of Camera Menu Operation Exit the menu screen To Open and Exit the Menu screenLanguage and Camera Identification Settings Language SettingCamera Identification Setting Exposure Settings Brightness SettingYou can set the brightness level levels Exposure Automatic Gain Control AGC settingShutter Speed Setting Shutter Flickerless Setting FlikerlessUse for removing the flicker of picture Use or button to select BLC/WDR option BLC/WDR SettingYou can set the exposure options using the Exposure menu Use BLC/WDR option to set the options for BLC or WDR cameraBLC/WDR User Level Area Bottom White Balance Settings Setting the WB White Balance Mode WB Mode Push Auto Day/Night Setting Motion Detector Setting Motion DET Detection Area SensitivityCondition Privacy Mask Privacy Masking SettingSpecial Special Menu SettingsEffect OFF Setting the digital effect EffectSetting the digital zoom D-ZOOM Naming the camera USER-TITLERepeat to set the remain characters Setting the HOT KEY Setting the title displaySynchronization Setting Sync Setting the Pix Mapping Data Communication Format CommandsStop command is 0xC5, 0x5F, 0x0C, 0x00, ID, C.S RS-485 ProtocolSpecifications Weight Electric Shutter 50 1/100,000 Auto Mode White BalancePower Consumption Storage Temperature