LG Electronics LVC-SX703PC/OC/MC, LVC-SX703PB/OB/MB Detection Area, Sensitivity, Condition

Page 30

LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:05 PM Page 30

Motion Detector Setting (MOTION DET)

4/15

7/15

4/15

TOP

LEFT CENTER RIGHT

BOTTOM

1/3 1/3 1/3

Detection Area

This camera has an alarm function. When the picture changes, the internal switch is closed.

•Sensitivity

Motion is detected when the accumulated value of changed brightness level exceeds 10% (MEDIUM mode) of reference in more than one area.

•Condition

The alarm function performs after 10 seconds when the camera is turned on.

	•	Caution
Vcc	OPEN	Motion detection malfunctions under the following situations.
OPEN		Please note the conditions below.
Alarm
		- If shooting an object under flickering fluorescent.
Out
		- If leaves or curtains are swayed by the wind.
	CLOSE

0	• Alarm keep low for 1 second after the end of moving picture.

1.		The period of motion.	• This function which is Motion Detection & Sensitivity has not
2.		The hold time is 1 sec.	been evaluated by UL.
			been evaluated by UL.
	30
	30

Image 30

Contents Color Video Camera LVC-SX703PB/OB/MBRisk of Electric Shock Do not Open Important Safety Instructions Manufacturer Contents and Features Features Chart Power SourceIs operated with Line lock mode Remove dust or dirt on the surface of the lens with a blowerLens mount cap Installing a lens sold separatelyPart Names and Functions Bracket can be fixed at the top or bottom of the camera.Power input terminal Power indicatorExternal Device Connectors RS-485 Connector Buttons for menu ALC Lens Setting SwitchLens iris output connector Lens Tons on the side panel.Connections Connecting the monitorInsert the plug of this power cord into a wall outlet Basic connectionMounting the Lens Mount type lensVideo type auto-iris lens Concerning Auto-Iris LensesDC type auto-iris lens ELC type auto-iris lensRS-485 Connection Alarm ConnectionExternal Device Connections Multi-Input ConnectionFlange-back Adjustment Installation of Camera Menu Operation To Open and Exit the Menu screen Exit the menu screenLanguage and Camera Identification Settings Language SettingCamera Identification Setting Exposure Settings Brightness SettingYou can set the brightness level levels Automatic Gain Control AGC setting ExposureShutter Speed Setting Shutter Flickerless Setting FlikerlessUse for removing the flicker of picture Use BLC/WDR option to set the options for BLC or WDR camera BLC/WDR SettingYou can set the exposure options using the Exposure menu Use or button to select BLC/WDR optionBLC/WDR User Level Area Bottom White Balance Settings Setting the WB White Balance Mode WB Mode Push Auto Day/Night Setting Motion Detector Setting Motion DET Detection Area SensitivityCondition Privacy Masking Setting Privacy MaskSpecial Menu Settings SpecialSetting the digital effect Effect Effect OFFSetting the digital zoom D-ZOOM Naming the camera USER-TITLERepeat to set the remain characters Setting the title display Setting the HOT KEYSynchronization Setting Sync Setting the Pix Mapping RS-485 Protocol CommandsStop command is 0xC5, 0x5F, 0x0C, 0x00, ID, C.S Data Communication FormatSpecifications Storage Temperature Electric Shutter 50 1/100,000 Auto Mode White BalancePower Consumption Weight