LG Electronics LVC-SX703PC/OC/MC, LVC-SX703PB/OB/MB instruction manual Synchronization Setting Sync

Page 36

LVC-SX703PC_AA4HEL_ENG_MFL-129 11/7/06 12:06 PM Page 36

Special Menu Settings

MENU
LANGUAGE	ENGLISH
CAMERA ID	OFF
EXPOSURE
WHITE BAL	ATW
DAY/NIGHT	AUTO
MOTION DET	OFF
PRIVACY MASK
SPECIAL
INITIAL SET	OFF
EXIT
EXIT
SPECIAL
EFFECT	OFF
D-ZOOM	-				+
USER TITLE	SX-700
TITLE DISP	OFF
HOT KEY	NEGA
SYNC	INT
PHASE SHIFT	000
PIX MAPPING	OFF
INITIAL SET	ON
EXIT
EXIT

Synchronization Setting (SYNC)

You can select internal sync (INT) mode or line-lock (LINE) mode. The SYNC function is available only with AC power source.

1.Select [SPECIAL] option on the [MENU] screen.

2.Press , , or button and the SPECIAL menu appears.

3.Use or to select [SYNC] option.

4.Use or button to select [INT] or [LL] (Line Lock). [INT]: Selects for using the internal synchronization.

[LL](Line Lock): Selects for the operation of multi cameras because it synchronizes the camera phase by using the external signal (AC Signal). A little phase deviation for some sets may be aligned.

5.Use or to select [PHASE SHIFT] option.

6.Use or button to select phase range. The PHASE ranges are from 0 to 524.

36

Image 36

Contents Color Video Camera LVC-SX703PB/OB/MBRisk of Electric Shock Do not Open Important Safety Instructions Manufacturer Contents and Features Features Chart Power SourceIs operated with Line lock mode Remove dust or dirt on the surface of the lens with a blowerInstalling a lens sold separately Part Names and FunctionsLens mount cap Bracket can be fixed at the top or bottom of the camera.Power input terminal Power indicatorExternal Device Connectors RS-485 Connector ALC Lens Setting Switch Lens iris output connector LensButtons for menu Tons on the side panel.Connecting the monitor Insert the plug of this power cord into a wall outletConnections Basic connectionMounting the Lens Mount type lensConcerning Auto-Iris Lenses DC type auto-iris lensVideo type auto-iris lens ELC type auto-iris lensAlarm Connection External Device ConnectionsRS-485 Connection Multi-Input ConnectionFlange-back Adjustment Installation of Camera Menu Operation To Open and Exit the Menu screen Exit the menu screenLanguage and Camera Identification Settings Language SettingCamera Identification Setting Exposure Settings Brightness SettingYou can set the brightness level levels Automatic Gain Control AGC setting ExposureShutter Speed Setting Shutter Flickerless Setting FlikerlessUse for removing the flicker of picture BLC/WDR Setting You can set the exposure options using the Exposure menuUse BLC/WDR option to set the options for BLC or WDR camera Use or button to select BLC/WDR optionBLC/WDR User Level Area Bottom White Balance Settings Setting the WB White Balance Mode WB Mode Push Auto Day/Night Setting Motion Detector Setting Motion DET Detection Area SensitivityCondition Privacy Masking Setting Privacy MaskSpecial Menu Settings SpecialSetting the digital effect Effect Effect OFFSetting the digital zoom D-ZOOM Naming the camera USER-TITLERepeat to set the remain characters Setting the title display Setting the HOT KEYSynchronization Setting Sync Setting the Pix Mapping Commands Stop command is 0xC5, 0x5F, 0x0C, 0x00, ID, C.SRS-485 Protocol Data Communication FormatSpecifications Electric Shutter 50 1/100,000 Auto Mode White Balance Power ConsumptionStorage Temperature Weight