Leica 18450, 18452 manual Displays, Record mode

Displays

2.1 In record mode

2.1.1 2.1.2		2.1.3			2.1.4	2.1.5
2.1.25
							2.1.6
2.1.24							2.1.7
							2.1.8
							2.1.9
							2.1.10
2.1.23							2.1.11
							2.1.13
2.1.22
		2.1.18		2.1.16
2.1.21	2.1.20		2.1.17		2.1.15 2.1.14
							2.1.12
							2.1.19

Note:

The displays listed here and mentioned throughout these instructions all appear either in the monitor or the optionally available external electronic viewfinder, depending on whether the latter is switched on or off with its own respective button. None the less, these instructions only refer to the monitor.

For more information on the Leica EVF 2, see p. 152 and the viewfinder’s instructions.

2.1.1Exposure mode

a.P: Programmed automatic exposure mode

b.A: Aperture priority mode

c.T: Speed priority mode

d.M: Manual setting of shutter speed and aperture

2.1.2Flash mode

(for built-in and external flash units, flashes in red if flash is not ready, otherwise white)

a. : Automatic flash activation

b. : Automatic flash activation with pre-flash

c. : Manual flash activation

d. : Manual flash activation with pre-flash

e. : Automatic flash activation with slower shutter speeds

f. : Automatic flash activation with pre-flash and slower shutter speeds

g. : fixed flash power to release slave flash lights

2.1.3 ISO sensitivity1

(appears in the place of 2.1.2 when flash is switched off; AUTO ISO values appear even if displays are switched off when shutter release button is pressed)

a.AUTO ISO

b.100

c.200

d.400

e.800

f.1600

g.3200

h.6400

i. 12500

2.1.4Compression rate

a.JPG Super fine

b.JPG fine

c.DNG + JPG S. fine

d.DNG + JPG fine

90 1 According to CIPA DC-004 Standard