Leica 18452, 18450 manual 155

Page 76

Sensor

Cosmic radiation (e.g. on flights) can cause pixel defects.

Condensation

If condensation has formed on or in the Leica X2, you should switch it off and leave it to stand at room temperature for around an hour. Once the camera temperature has adjusted to room temperature, the condensation will disap- pear by itself.

Care instructions

As any soiling also represents a growth medium for microorganisms, you should take care to keep the equipment clean.

For the camera

Only clean the Leica X2 with a soft, dry cloth. Stubborn dirt should first of all be covered with a well-thinned cleaning agent and then wiped off with a dry cloth.

To remove stains and fingerprints, the camera should be wiped with a clean lint-free cloth. Tougher dirt in hard to reach corners of the camera body can be removed with a small brush.

All mechanically operated bearings and sliding surfaces on your Leica X2 are lubricated. Please remember this if you will not be using the camera for a long period of time. To prevent the lubrication points becoming gummed up, the camera shutter should be released a number of times every three months. It is also recommended that you repeatedly move and use all other controls.

For the lens

Normally, a soft hair brush is sufficient to remove dust from the outer lens element. However, in case of more stubborn dirt, they can be carefully cleaned with a very clean, soft cloth that is completely free of foreign mat- ter, using circular motions from the inside to the outside. We recommend micro-fiber cloths (available from photographic and optical specialists) that are stored in a protective container and can be washed at temperatures of up to 40°C/104°F (without fabric softener, never iron!). Cloths for cleaning glasses, which are impregnated with chemicals, should not be used as they can damage the lens glass.

The lens cap included in the delivery also protects the lens from uninten- tional fingerprints and the rain.

For the battery

Rechargeable lithium ion batteries generate power through internal chemical reactions. These reactions are also influenced by the external temperature and humidity. Very high or low temperatures reduce the life of the battery.

Always remove the battery if you will not be using the Leica X2 for a long pe- riod of time. Otherwise, after several weeks the battery could become totally discharged, i.e. the voltage is significantly reduced.

Lithium ion batteries should be stored only when partially charged, i.e. not completely discharged or fully charged (in the corresponding display

(2.1.5/2.2.5). For very long storage periods, it should be charged up for around 15 minutes twice a year to prevent total discharge.

The battery must have a temperature of 0°–35°C/32°–95°F to be charged

(otherwise the charger will not switch on, or will switch off again).

155

Image 76
Contents Leica 11c 11b 11a 32a 38a FCC Note U. S. only FCC CautionTrade Name Model NoLeica Battery case Order no ForewordScope of delivery USB cord Order no Leather carrying strap Lens capLegal notes Disposal of electrical and electronic equipmentTable of contents Review mode AccessoriesPrecautions and care instructions Flash photographyFlashing Focusing not possible Designation of partsTop view Hole for locking pinBottom view View from the right door openCharger Record mode DisplaysSeconds delay Enlarged central section of the image Indication that internal memory is used to store imagesSpot autofocus metering field Indication of shifted pair of valuesRecording mode White balanceReview mode Menu items Menu items ExplanationQuick guide ATTAChINg ThE CArryINg STrAp ChArgINg ThE bATTEry DETAILEd INSTrUCTIoNSFirst aid Battery can only be charged outside the camera Inserting the battery into the charger Preparing the charger CTo attach the plug To remove a plug, simultaneouslyINSErTINg ANd rEmovINg ThE bATTEry MEmory CArd Turn off the camera see also p with the main switchOpening the battery / memory card door Inserting and removing the batteryCharge level displays 101First 102 Inserting and removing the memory cardClosing the battery / memory card door 103MoST ImporTANT SETTINgS / CoNTroLS 104Selecting the record and review modes 105Review for unlimited time Play 106 Automatic review of the last picture107 ShUTTEr rELEASE bUTToN108 SELECTINg a SETTINg / a vALUE in a SUbmENU CoNFIrmINg a SETTINg109 CALLINg Up a mENU ITEm’S SUbmENU110 Exiting the menu111 ISO 1.13 for Sensitivity WB 1.14 for White balanceBasic camera settings Menu language Date can be set anywhere between 2009112 Date113 Automatic stand-by modeFor shutter sounds Monitor and electronic viewfinder settings Switching the display setsSequences Record mode 114115 Jpeg resolution Fixed presets116 File format / compression rateManual setting by metering Direct color temperature settingFine-tuning white balance settings 117118 ISO sensitivity119 Color renditionSelecting the mode Focusing120 121 Automatic distance setting / AutofocusAF Assist Lamp 122 Area modeAF metering modes Spot mode 123Manual focusing Face detection mode124 125 Manual focus assist functionCenter-weighted metering 126Exposure metering and control Exposure metering modes Multi-field metering127 HistogramExposure control As an indication, 2.1.15 appears additionallyShifting program mode 128Programmed automatic exposure Tion also appears 2.1.15, see next sectionAperture priority mode Speed priority mode129 Manual mode Procedure130 Sure value in increments of 1/3 EVExposure compensation 131Corresponding sub-menu appears 132 Automatic exposure bracketing133 Flash modes 134Automatic flash activation 135 Manual flash activationManual flash and pre-flash activation Automatic flash activation with slower shutter speedsStudio mode 136Flash range Sensitivity Maximum flash range1137 Using external Flash unitsFlash exposure compensation Additional Functions Self-timer Setting138 Operation139 Formatting the memory cardWorking color space 140Creating new folder numbers 141 Review mode Selecting review modes 142143 SELECTINg pICTUrESPicture and file numbers change accordingly ENLArgINg ThE pICTUrE SImULTANEoUS rEvIEw oF 16 pICTUrES144 SELECTINg ThE TrImmINgDeleting single pictures 145This is protected appears for a short time Deleting all pictures 146ProTECTINg/UNproTECTINg pICTUrES Tures using the left and right direction buttons 1.24/1.27 Protection switch to the position marked Lock see p147 Protected picture is indicated by the lock displayConnecting / Playing back pictures 148Review of Portrait-format pictures Playback with Hdmi equipment149 Transferring data to a computerApple Macintosh Mac OS X 10.4 and higher With Mac operating systems150 Installing Adobe Photoshop LightroomWorking with DNG raw data 151 Installing firmware updatesSystem requirements 152 Replacement parts Order no 153Handgrip Flash units154 General precautionsMonitor 155 Batteries have only a limited service life 156For the charger For memory cards157 StorageTechnical data 158Storage media SD/SDHC/SDXC Memory Cards, MultiMedia Cards Internal buffer memory approx MBSelf-timerDelay optionally 2 or 12s 159Monitor 2,7 TFT LCD with 230,000 pixels Displays see pLeica Information Service 160Leica Akademie Leica Customer Care