Leica 18452, 18450 manual 113, Automatic stand-by mode, For shutter sounds

Automatic stand-by mode

If active, this function switches the camera to stand-by mode after the selected time to save power.

In the menu, select Auto Power Off (3.24), and in the submenu the desired setting.

Note:

Even if the camera is in stand-by mode, it can be turned on again at any time by pressing the shutter release button (1.8) or by turning it off and back on with the main switch (1.7).

Key acknowledgement (response) and shutter sounds With the Leica X2, you can decide whether you want your settings and other functions to be acknowledged by an acoustic signal – two volumes are avail- able, or whether operation of the camera and actually taking photographs should be predominantly free of noise.

For shutter sounds

In the menu, select Shutter Volume (3.29), and in the submenu the desired setting, Off, Low, or High.

For key acknowledgement and memory card capacity limit sounds

In the Menu, select Acoustic Signal (3.30), in the first submenu Volume, and in the second level submenu the desired setting, Off, Low, or High.

The sounds acknowledging key presses and a memory card capacity limit can be switched on or off separately in the respective submenus Keyclick and SD card full.

113