LED: A small orange light which will indicate the current state and function of the RemoteCam. In bright light (such as sunlight) this might be difficult to see.
Mini USB Port: A
Reset Button: Used to quickly return the RemoteCam to it’s initial booted state. This is typically used only if the RemoteCam freezes and needs to be reset.
MicroSD Card Slot: The slot for inserting the microSD card which the RemoteCam records to. To insert a card, simply push it into the slot. To remove it, push it in again, and it will ‘pop’ right out. Pictured with microSD card inserted.
Keychain: Used to attach keys. Adds to the concealability of the camera, as remote controls for cars or garage doors are commonplace on keychains.
Power: Press to turn the RemoteCam on and off. Do not turn off the RemoteCam whilst recording, or immediately after recording.
Record: Starts and stops the RemoteCam recording. Press quickly to take a photograph. Press and hold to start recording video, and press again to stop.
Microphone: The device which records sound. If this hole is blocked, then the range and quality of the audio recording will be significantly reduced.
Lens: The
Additional Buttons: The RemoteCam only needs two buttons to operate - however, the majority of remote controls have more than two buttons! To keep up the illusion, we included these two additional buttons. They’re just there for looks, and won’t do anything at all.
7