Menu Item | Settings | Description |
| (Bold=default) |
|
|
|
|
Mode | 2M, 5M (with | Select “Mode” and press OK. Use |
| Mode set to | UP/DOWN to select 1P (single |
| 1P or 3P for | photo), 3P (burst of 3 photos), or |
| photos), | Movie (video mode). Press OK. |
| Use UP/DOWN to set LO (2MP) | |
| Movie (video) | or HI (5MP) still photo resolution |
| mode) | (High resolution provides higher |
|
| quality photos, low resolution |
|
| allows you to store more photos |
|
| on the SD card), or video length |
|
| from |
|
| selected). |
|
|
|
Format | FO/NO, | Deletes (erases) all files stored |
| Y/N | on a card to prepare it for reuse. |
|
| Always format a card that has |
|
| been previously used in other |
|
| devices. Caution! Make sure you |
|
| have downloaded and backed |
|
| up any files on the card that you |
|
| want to preserve first! Press UP to |
|
| select “FO”, press OK, then select |
|
| “Y” (Yes) and press OK again to |
|
| confirm you want to format the |
|
| card. The extra step and “No” |
|
| defaults help prevent accidental |
|
| erasure of all your photos/videos. |
|
|
|
When you’ve finished using the Setup Menu, and are ready to return the camera to normal operating mode, so it will begin to capture photos or videos for you, simply press the SETUP button. After you exit the Setup Menu, the display will go blank and the camera is in “sleep” mode. About 30 seconds later, the camera will begin taking photos or videos when triggered, at intervals determined by the trigger delay time setting.
11