Tasco 119200W instruction manual Camera won’t retain settings

Page 20

Troubleshooting / FAQ

2.During use, the LED will not flash when the camera takes an image. This is to help keep the camera hidden from game.

Camera won’t retain settings

1.Make sure that you have been saving the changes to any parameter settings that you made while in Setup mode, by pressing “OK” after changing the setting. If you don’t save your new setting after changing it, the camera will continue to use the original default setting for that parameter.

Do not mix old and new batteries.

Do not mix battery types-use ALL lithium or ALL alkaline.

Rechargeable batteries are not recommended.

20

Image 20
Contents Digital Surveillance Camera Page Setup Menu Reference Table IndexSurveillance Cam to obtain maximum battery life 800 423-3537. In Canada, call 800Main Features IntroductionParts and Controls Guide Control Panel Detail Memory Inserting an SD cardAbout the Setup Menu Using the Setup MenuSetup Menu Display Battery LevelTime Bold=default DateDelay Bold=default Mode FormatCamera Operation Camera Operation Using an SD Card Reader Connecting the Camera to Your Computer via USBGlossary Technical Specifications Battery life is shorter than expected Camera stops taking images or won’t take imagesCamera won’t power up AA batteries in this Surveillance CamPhotos Do Not Capture Subject of Interest PIR Sensor LED Flashes/Doesn’t FlashCamera won’t retain settings TWO-YEAR Limited Warranty FCC Compliance Statement Page 2013 B.O.P