BATTERY and SD CARD INSTALLATION
The Tasco 119200W Digital Surveillance Camera is designed to operate using 4 AA batteries. We recommend using Lithium (for longest life) or Alkaline batteries.
NOTE: Always set the power switch to the OFF position when installing or removing batteries.
Please make sure the batteries are inserted correctly, as indicated inside the battery compartment. Incorrect voltage or polarity
Do not mix old and new batteries.
Do not mix battery
Memory
Your 119200W Digital Surveillance Camera has a memory card slot, to accept SD cards up to 32GB max. capacity (sold separately).
Inserting an SD card
•Make sure the power switch is in the OFF position whenever adding or removing memory.
•Insert an SD card into the card slot completely and oriented correctly as shown by the icon above the slot (label up, contacts facing down and notched corner on the right).
•To remove the SD memory card, depress the SD card and pull out the card gently.
Using a new, blank SD card is recommended. If the SD card has been used in another device, please make sure to format it using the Format option in the Surveillance Camera’s Setup menu before you set the camera to capture photos/videos. New cards are ready to use straight from the package.
8