Philips WV-NW484S operating instructions Monitor Images on a PC, Zoom

Monitor Images on a PC (continued)

(2/3)

No.		Item	Description
(6)	[Image capture size]		Click these buttons to set the resolution of the main
			area to VGA or QVGA.
			These buttons will be displayed only when "JPEG" is
			selected as the image type.
		[VGA] button	Click this button to display images in the main area at
			VGA size.
		[QVGA] button	Click this button to display images in the main area at
			QVGA size.
(7)	[ZOOM]		Click the desire button to enlarge the displayed image.
			Only the image in the main area is enlarged.
		[X1] button	Return to the original display size (1x size).
		[X2] button	Display image with 2x size.
		[X4] button	Display image with 4x size.
(8)	[Brightness]*2		Click these buttons to adjust the brightness of the
			image.
		[-] button	The displayed image will be darker.
		[0] button	The adjusted brightness will return to the default
			brightness.
		[+] button	The displayed image will be brighter.
(9)	AUX*2		Click these buttons to switch the state of the AUX
			connector.
		[OPEN] button	Sets the AUX connector to open.
		[CLOSE] button	Sets the AUX connector to closed.
(10)	[Alarm occurrence		This button will be displayed and will blink when an
	indication] button*2		alarm has occurred. When this button is clicked, the
			alarm output terminal will be reset and this button will
			disappear. (→ Setup Manual)
(11)	[Full screen] button		Click this button to display images on a full screen. To
			return to the "Live" page, press the [Esc] key, the [F5]
			key, or the combination of the [Alt] key and [F4] key on
			the PC's keyboard.

38