Philips WV-NW484S operating instructions Preface, Features

Preface

Features

This video surveillance camera is equipped with a 10BASE-T/100BASE-TX terminal (network terminal) for connection to a network.

This network terminal is used to establish a connection between the camera and a LAN (Local Area Network) or other network (e.g. Internet) so that images from the camera can be checked on a personal computer (from here on, "PC") on the network.

Note..............................................................................................................................

• To check images from the camera on a PC, the PC's network environment must first be set up. A web browser must also be installed on the PC.

...................................................................................................................................

Super Dynamic III (SUPER-D III)

Auto Back Focus function

VMD (Video Motion Detector) function for detecting motion of an intruder, etc. in the monitoring area and sounding an alarm by an alarm signal

Progressive output (motion adaptive interlace/progressive conversion function) Dual Encode Function for simultaneous transmission of JPEG and MPEG-4 Power over Ethernet (IEEE802.3af-compliant, from here on, "PoE") function SD memory card slot

5