Notes
1.Avoid strong impact and stay away from strong electromagnetic interference and vibration.
2.There are some sophisticated parts inside the camera, therefore, during transportation and installation, please avoid damage caused by stress or severe vibration. For the sake of safety, please do not switch on power before completing all installation.
3.Please comply with all electrical safety standards during operation, camera or signal transmission cable should maintain a sufficient distance (50 meters, 165 feet) from
4.Please install the camera in
5.Please do not position the camera facing direct sunlight or other strong light source; this could damage the lens and sensor.
6.The temperature range for the cameras are
7.To avoid lightning strikes, please make sure the power supply ground line is in good condition.