4Communication Protocol
This camera has a communication function that enables external devises, such as a PC, to control the camera’s functions.
Please use the “RCLinkCtrl” communication software , or the following communication protocol to communicate to the camera:
4.1Communication Method
UART（RS232C）, binary communication
4.2Communication Settings
| Settings |
Baud Rate | 9,600 bps / 38,400 bps / 57,600 bps / 115,200 bps |
Data Bit | 8 bit |
Parity | None |
Stop Bit | 1 bit |
Flow Control | None |
|
|
4.3Communication Format
The Sending data format from the PC to the camera is as follows:
| SOF |
| Device |
| Read/Write |
| Page | Command | Data |
| Data |
|
| EOF |
|
|
| Code |
|
| Selection | Code | Length |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| ||||
| (8bit) | (6bit) |
| (1bit) | (1bit) | (8bit) | (8bit) |
| (R: 1 byte) |
| (8bit) | ||||
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
| (W: n bytes) |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Receiving Data format from the camera is as follows:
After sending the Read Command:
SOF | Data Length | Data | EOF |
(8bit) | (8bit) | (n bytes) | (8bit) |
|
|
|
|
After sending the Write Command:
SOF | Data Length | Receiving Code | EOF |
(8bit) | (8bit) “00” | (1 byte) | (8bit) |
|
|
|
|
FVL030B1 | 20/32 | |
User’s Guide Rev. 1.01 | ||
|