Ricoh FV-L030B1 manual Vertical Timing, Normal Full Scanning Setting 10H 1XX00XXX, 11H

Page 6

2.1.2Vertical Timing

2.1.2.1

Normal Full Scanning

(setting 10H: 1XX00XXX, 11H: XXX0X000)

1 H = 63.5556 μs, 29.9700 Hz at 30fps 1 H = 31.7778 μs, 59.9400 Hz at 60fps 1 H = 21.1852 μs, 89.9100 Hz at 90fps

525H One vertical (1V)

FVAL

31H494H31H

1

2

493

494

Video out

	31H				494H				31H
	31H				494H				31H

Vertical blanking
Vertical blanking				Video output

LVAL

DVAL

2.1.2.2

Partial Full Scanning

(setting 10H: 1XX01XXX, 11H: XXX0X000)

1 H = 63.5556 μs, 31.4685 Hz at 30fps 1 H = 31.7778 μs, 62.9370 Hz at 60fps 1 H = 21.1852 μs, 94.4055 Hz at 90fps

500H One vertical (1V)

FVAL

6H 494H6H

1

2

493

494

Video out

6H494H6H

VerticalVideo output blanking

LVAL

DVAL

※By transferring the blanking period pixels at a high rate, the frame rate of the partial full scanning can be increased compared to that of the normal full scanning.

	FVL030B1	6/32
	User’s Guide Rev. 1.01	6/32
	User’s Guide Rev. 1.01

Image 6

Contents VGA CCD FVL030B1 User’s Guide RevTables of Contents Connector Specifications Camera Link ConnectorPowerI/O Connector / OUTNormal Mode Setting 10H Horizontal TimingNormal Full Scanning Setting 10H 1XX00XXX, 11H Partial Full Scanning Setting 10H 1XX01XXX, 11HVertical Timing Partial Scanning Setting 10H 1XX01XXX, 11H FVL030B1 User’s Guide Rev Setting 10H 1XX01XXX, 11H2.4 1/4 Partial Scanning Variable Partial Scanning Setting 10H 1XX01XXX, 11H SUBBinning Mode Setting 10H Vertical Timing Binning Full Scanning Setting 10H 1XX10XXX, 11HSetting 10H 1XX11XXX, 11H Binning Partial Full ScanningBinning 1/2 Partial Scanning Binning 1/4 Partial ScanningXclk Data Order on the Camera Link Output1 Taps Transferring Image（1X1Y ） Pixel Transferring ImageNormal Mode Frame ExposureElectric Shutter Pulse Width Trigger Mode Pulse Width Trigger Mode（VReset ）Pulse Width Trigger Mode NonReset Exposure TimingEdge Preset Trigger Mode Edge Preset Trigger Mode VResetEdge Preset Trigger Mode NonReset Reset Mode Communication Settings Communication MethodCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Camera Control Command Camera Command List Eeprom24/32 Descriptions of the Camera Control Commands Underline settings are the factory default settings26/32 27/32 28/32 29/32 30/32 31/32 32/32