Ricoh FV-L030B1 manual Connector Specifications, Camera Link Connector

Page 3

1Connector Specifications

1.1Camera Link Connector

SDR (3M) or equivalent

This product is a PoCL type.

When a frame grabber is PoCL compliant, DO NOT SUPPLY POWER FROM THE I/O CONNECTOR. When a frame grabber is NOT PoCL compliant, supply power from the I/O connector.

Pin Assignment

Pin No.	Signal Name	Pin No.	Signal Name
1	+12V	14	GND

2	X0	15	X0+

3	X1	16	X1+

4	X2	17	X2+

5	Xclk	18	Xclk+

6	X3	19	X3+

7	SerTC+	20	SerTC

8	SerTFG	21	SerTFG+

9	CC1(TRG)	22	CC1+(TRG)

10	CC2+	23	CC2

11	CC3	24	CC3+

12	CC4+	25	CC4

13	GND	26	+12V

	FVL030B1	3/32
	User’s Guide Rev. 1.01	3/32
	User’s Guide Rev. 1.01

Image 3

Contents FVL030B1 User’s Guide Rev VGA CCDTables of Contents Camera Link Connector Connector Specifications/ OUT PowerI/O ConnectorHorizontal Timing Normal Mode Setting 10HNormal Full Scanning Setting 10H 1XX00XXX, 11H Partial Full Scanning Setting 10H 1XX01XXX, 11HVertical Timing Partial Scanning Setting 10H 1XX01XXX, 11H FVL030B1 User’s Guide Rev Setting 10H 1XX01XXX, 11H2.4 1/4 Partial Scanning SUB Variable Partial Scanning Setting 10H 1XX01XXX, 11HBinning Mode Setting 10H Binning Partial Full Scanning Setting 10H 1XX10XXX, 11HSetting 10H 1XX11XXX, 11H Vertical Timing Binning Full ScanningBinning 1/4 Partial Scanning Binning 1/2 Partial ScanningData Order on the Camera Link Output XclkPixel Transferring Image 1 Taps Transferring Image（1X1Y ）Normal Mode Frame ExposureElectric Shutter Pulse Width Trigger Mode（VReset ） Pulse Width Trigger ModeExposure Timing Pulse Width Trigger Mode NonResetEdge Preset Trigger Mode VReset Edge Preset Trigger ModeEdge Preset Trigger Mode NonReset Reset Mode Communication Settings Communication MethodCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Eeprom Camera Control Command Camera Command List24/32 Underline settings are the factory default settings Descriptions of the Camera Control Commands26/32 27/32 28/32 29/32 30/32 31/32 32/32