Ricoh FV-L030B1 manual Normal Mode Setting 10H, Horizontal Timing

Page 5

2Camera Output Timing Charts

2.1	Normal Mode			(Setting		10H: 1XX0XXXX)

	Normal Full Scanning				Partial Full Scanning				1/2 Partial Scanning			1/4 Partial Scanning
Clock
Speed	Normal	x2/3	x1/3		Normal	x2/3	x1/3		Normal	x2/3	x1/3	Normal	x2/3	x1/3
(MHz)

Frame	89.9	59.4	29.9
Rate	89.9	59.4	29.9		94.4	62.9	31.5		180.1	120.1	60.1	360.3	240.2	120.1
Rate	(90)	(60)	(30)		94.4	62.9	31.5		180.1	120.1	60.1	360.3	240.2	120.1
(Hz)	(90)	(60)	(30)
(Hz)

	※Clock Speed: 36.8181 MHz（Normal）、24.5454 MHz（x2/3）、12.2727 MHz（x1/3）

2.1.1Horizontal Timing

1 CLK = 81.4816 ns at 30fps

1 CLK = 40.7408 ns at 60fps

1 CLK = 27.1605 ns at 90fps

LVAL		780 CLK
			One horizontal (1H)

DVAL

132 CLK648 CLK132 CLK

FVAL

39

93 CLK

CLK

Video out

	132 CLK				648 CLK				132 CLK
	132 CLK				648 CLK				132 CLK

Horizontal blanking				Video output

	FVL030B1	5/32
	User’s Guide Rev. 1.01	5/32
	User’s Guide Rev. 1.01

Image 5

Contents FVL030B1 User’s Guide Rev VGA CCDTables of Contents Camera Link Connector Connector Specifications/ OUT PowerI/O ConnectorHorizontal Timing Normal Mode Setting 10HVertical Timing Normal Full Scanning Setting 10H 1XX00XXX, 11HPartial Full Scanning Setting 10H 1XX01XXX, 11H 2.4 1/4 Partial Scanning Partial Scanning Setting 10H 1XX01XXX, 11HFVL030B1 User’s Guide Rev Setting 10H 1XX01XXX, 11H SUB Variable Partial Scanning Setting 10H 1XX01XXX, 11HBinning Mode Setting 10H Setting 10H 1XX11XXX, 11H Setting 10H 1XX10XXX, 11HVertical Timing Binning Full Scanning Binning Partial Full ScanningBinning 1/4 Partial Scanning Binning 1/2 Partial ScanningData Order on the Camera Link Output XclkPixel Transferring Image 1 Taps Transferring Image（1X1Y ）Electric Shutter Normal ModeFrame Exposure Pulse Width Trigger Mode（VReset ） Pulse Width Trigger ModeExposure Timing Pulse Width Trigger Mode NonResetEdge Preset Trigger Mode VReset Edge Preset Trigger ModeEdge Preset Trigger Mode NonReset Reset Mode Communication Format Communication SettingsCommunication Method Name Descriptions 【Example Code】Reading the data from the command 00H Eeprom Camera Control Command Camera Command List24/32 Underline settings are the factory default settings Descriptions of the Camera Control Commands26/32 27/32 28/32 29/32 30/32 31/32 32/32