Wildview Series
In order to obtain proper weather resistance, please make sure that both door latches are securely locked in place.
Testing the camera coverage area
One of Wildview Scouting Camera’s features is the ability to test the coverage area.
•After mounting the camera, open front housing and slide the power switch to Test position. The front LCD will display the word “tESt”.
•Close the front housing.
•Walk around in the front of the camera to see if you have mounted the camera in the proper position. A green indicator light on the front will blink when you have intruded the coverage area.
•Adjust the camera position as needed and repeat testing until the desired coverage area is achieved.
www.wildviewcam.com | Toll Free | 16 |