Radio Shack STC-TGL2M, STC-TGL4M, STC-TGL5M user manual Toll Free

Page 22

Wildview Series

or [DN] until screen shows “ESC” then press [SET] again to exit.

d.This will only delete the last image saved in the memory.

oDelete All picture:

a.Press [SET] button to enter delete setting. Display will show “ESC”

b.Press [UP] or [DN] to select d-ALL (delete all)

c.Press [SET] to delete all images. The display will show “DONE” and will exit to count down mode automatically.

oFormat:

a.Press [SET] button to enter delete setting. Display will show “ESC”

b.Press [UP] or [DN] to select Ft (format)

c.Press [SET] to confirm. The display will show “DONE” and exit to count down mode automatically.

www.wildviewcam.com

Toll Free 888-304-6125

22

Image 22
Contents STC-TGL2M / STC-TGL4M / STC-TGL5M User’s Manual Toll Free Customer SupportWildview Limited Warranty Manual Contents Camera overview Front view Side view Open view image with major parts indication Camera kit contents Battery & memory installationToll Free Sdram ™ SD cards must be clean no images from other sources Definition STC-TGL2M STC-TGL4M STC-TGL5MProgramming your Wildview Camera Toll Free Toll Free Mounting the camera Toll Free Wildview Series Toll Free Viewing images Toll Free Toll Free Saving and Deleting images Saving ImagesToll Free Toll Free SD card Compatibility Chart PQITechnical Specifications Qvga Toll Free General Information Toll Free AVI Built In 32MB AVI Toll Free