Wildview Series
•When you have completed testing the coverage area, open the front housing and slide the power switch from Test position to PIR position. Front LCD counter will show “0000”. The camera will enter count down mode for 1 minute and the front green indicator will start blinking, giving you one minute to leave the coverage area. Then camera will enter PIR detection mode.
NOTE: Make sure you slide the power switch from TEST mode to PIR mode before you leave the field. Otherwise the Camera will not take any pictures.
Switch use: Do not move the switch from TEST directly to PIR. Doing so will cause the camera to not operate. Slide the switch to OFF. Wait for the front LCD screen to turn off then continue to slide the switch to PIR.
www.wildviewcam.com | Toll Free | 17 |