Radio Shack STC-TGL4M, STC-TGL2M, STC-TGL5M user manual Toll Free

Page 12

Wildview Series conditions.

b.On – Flash on for every image captured

c.Off – No Flash will go off.

4.Select Burst mode: Slide the switch to 1 / 2 / 3 / AVI position. If you choose AVI mode, the camera will automatically switch to 1 picture mode if it detects a low light source.

5.Turn on the Camera to set the Date / Time stamp

a.Slide the power switch to the PIR position

b.Press and hold [SET] button for 2 seconds to enter date & time setting mode.

c.Time and HH will blink. Press [UP] or [DN] to adjust the hour

d.Press [SET] button to enter minute setting. Time and MM will blink. Press [UP] or [DN] to adjust the minute.

e.Press [SET] button to enter the month setting. Date & MM will blink. Press [UP] or [DN] to

adjust month.

www.wildviewcam.com

Toll Free 888-304-6125

12

Image 12
Contents STC-TGL2M / STC-TGL4M / STC-TGL5M User’s Manual Toll Free Customer SupportWildview Limited Warranty Manual Contents Camera overview Front view Side view Open view image with major parts indication Camera kit contents Battery & memory installationToll Free Sdram ™ SD cards must be clean no images from other sources Definition STC-TGL2M STC-TGL4M STC-TGL5MProgramming your Wildview Camera Toll Free Toll Free Mounting the camera Toll Free Wildview Series Toll Free Viewing images Toll Free Toll Free Saving and Deleting images Saving ImagesToll Free Toll Free SD card Compatibility Chart PQITechnical Specifications Qvga Toll Free General Information Toll Free AVI Built In 32MB AVI Toll Free