RCA LDK 4700 DC power output socket, DC power input socket, Input voltage must not exceed +17 Vdc

LDK 5481 + LDK 4700 User’s Guide DigiLink Adapter

2-15

2.7.9 DC power output socket

Figure 2-13. DC power and tally output connector

12

43

1.Power ground

2.On air (+5V, 100 Ohm)

3.Housing

4.+12 Vdc (max. 18W)

Shield of cable directly to the connector housing.

The socket provides access to an internal tally switch. When the camera is on-air, the contact of the internal relay is closed.

Hirose 4-pin female; panel view

Panel part number: (X3) 2422 026 04675

2.7.10 DC power input socket

Caution

The input voltage must not exceed +17 Vdc.

Figure 2-14. DC power input connector

14

2 3

1.Power ground

2.-Batt sense

3.+Batt sense

4.+10.5 Vdc . . . +17 Vdc

This socket accepts a DC voltage of 12V nominal. Maximum power consumption 60W.

XLR 4-pin male: panel view (X7)

v4.0