RCA LDK 5481, LDK 4700 manual Compatibility, Configurations, Digilink system SDI coax configuration

Page 6

LDK 5481 + LDK 4700 User’s Guide DigiLink system

1-2

1.3Compatibility

If you wish to control your camera locally, you can connect an OCP 400 to the RS-232 connector of the camera. When an OCP 400 panel is used with the DigiLink system, C2IP functions (e.g. file management) are not supported by the system.

☞Note

The LDK 5481 adapter is backwards compatible with existing LDK 5480 breakout boxes and can be connected to them as described in the LDK 5480 User’s Guide.

1.4Configurations

1.4.1 Digilink system SDI coax configuration

A camera head with an LDK 5481/00 adapter can be connected to the LDK 4700/00 base unit using two coax SDI cables. The maximum length of cable that can be used is 250m (820 ft). High quality coax cable should be used (for example, Belden 1694A). The DC power supply for the camera is supplied directly to the adapter by an optional local power supply or by the base unit (using a DC power cable).

Figure 1-1. DigiLink system SDI coax connection

LDK 5481/00

DigiLink Adapter

2x coax cable

max. length 250m. (820ft.)

optional DC power cable

SD Camera head

optional LDK 5901 DC power supply

LDK 4700/10 DigiLink Base Unit

	Ready	On-ai r
	Ready	On-ai r

RS-422 with powerline LDK8121/xx max. length 25m. (82ft.)

mains power

OCP 400/10

v4.0

Image 6

Contents User’s Guide Copyright Declaration of ConformityFCC Class a Statement TrademarksTable of contents LDK 5481 + LDK 4700 User’s Guide Accessories Following DigiLink accessories are availableIntroduction Configurations Digilink system SDI coax configurationCompatibility DigiLink system multicore configuration DigiLink system multicore connectionStand alone SDI coax configuration Stand alone multicore configurationDigiLink system hybrid fiber configuration DigiLink system dual fiber configurationSchematic overview of the intercom routing IntercomSafety Summary Important information EnglishWichtige Hinweise Deutsch Sicherheit ZusammenfassungVorsicht AchtungFiber optic cable precautions Laser safety statement EuropeLaser safety statement US Fiber optic transmission unitsSpecifications LDK 5481/00 version multicore/coaxLDK 5481/20 version fiber version Dimensions LDK 5481 DigiLink adapter dimension sketchPowering the camera ControlsCarrying handle replacement Attaching the LDK 5481 adapter to a camera headScript board accessory Mounting a script boardAdapter connectors DigiLink adapter connector locationsSDI video output connector SDI video input connectorMulticore connector Multicore connectorHybrid fiber connector Video signal VF output connectorVideo signal Cvbs output connector Intercom headset connector LCP / Fiber power connectorDC power output socket DC power input socketInput voltage must not exceed +17 Vdc Script light power supply socket 15. Script light power supply output connectorInstall menu LDK 5481 + LDK 4700 User’s Guide DigiLink Adapter Base unit Wichtige Hinweise Deutsch Vorsicht Fiber optic transmission units Installation information VentilationRack mounting instructions Installation notices Mains power supply chordFor Switzerland LDK 4700/00 version multicore LDK 4700/10 version coaxLDK 4700/20 version fiber DigiLink base unit dimension sketch Indicators Controls and indicatorsPowering the base unit Set-up itemsCamera Number CA This is the inactivity state of the menuConnecting the studio signalling Call and On-air signalsDry contact signalling DigiLink base unit connectors DigiLink base unit connector locations LDK 4700/00Setup switches Audio out connectorBase unit setup switches Switch Function Off default External video input connector Reference input connectorTeleprompter input connector 6 Y, Pr, Pb output connectors SDI Camera connectorsCvbs output connector SDI video output connectors 10 RS-232/RS-422 control connectorMains power supply input socket Auxiliary connector DC power output connector22. Multicore connector