RCA LDK 5481, LDK 4700 manual Fiber optic transmission units

•Um einer Überhitzungsgefahr vorzubeugen, ist das Produkt korrekt zu belüften;

•Das Produkt darf nur an eine Stromquelle mit der vorgeschriebenen Nennspannung angeschlossen werden.

Fiber optic transmission units

CLASS 1

LASER PRODUCT

LASER KLASSE 1

PRODUKT

A yellow coloured CLASS 1 LASER PRODUCT label is located at the back side of the unit, near the hybrid fiber connector which is at the right side of the back panel.

Laser safety statement (Europe)

Fiber optic transmission units are classified as a “CLASS 1 Laser Product” according to EN 60825-1, Safety of Laser products. Class 1 laser products are considered safe and do not result in biological hazard if used according to the instructions.

Laser safety statement (US)

Fiber optic transmission units are classified as a “CLASS 1 Laser Product” according to 21CFR 1040.10 of the US Food and Drug Administration (FDA) Center for Devices and Radiological Health.

WARNING

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

Fiber optic cable precautions

Fiber optic cables and connectors are easily damaged; take the following percautions into account:

•Do not bend the cable beyond the minimum bend range specified for the cable.

•Avoid kinks or sharp bends in the cable.

•Avoid subjecting the cable to a high tension force.

v4.0