Power Your Camcorder
Optional Car Cord Adapter
The optional DCC08 car cord shown on page 67 allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts
Note: Consult the installation and operating instructions enclosed with the DCC08 for complete operating instructions.
Cautions: The DCC08 is designed to be used only with vehicles having negative ground electrical systems.
Use only car cord adapter DCC08 with this camcorder. Use of any other car cord adapter might damage the camcorder and void your warranty.
Use the DCC08 Car Cord Adapter
To Cigarette
PowerLighter Socket
Connector
Optional DCC08 Car
Cord Adapter
1.Set the POWER switch to OFF to turn off the camcorder. The power indicator on the camcorder turns off.
2.If the battery or DC cable is attached to the camcorder, remove it.
3.Hold the bottom of the power connector flush against the camcorder, and press the connector down until it locks into place as shown above.
4.Take the vehicle’s cigarette lighter out of the socket.
5.Insert the car cord’s cigarette lighter plug into the vehicle’s cigarette lighter socket. The power indicator on the car cord adapter lights.
6.Set the POWER switch to CAMERA to turn on the camcorder. The power indicator on the camcorder lights.
Caution: Make sure the camcorder’s power is turned off before removing the car cord’s plug from the cigarette lighter socket.
16