Videocassettes
Insert and Remove Cassettes
|
|
|
| Caution: Insert |
|
|
|
| the cassette |
|
|
| Tape | only one way |
|
|
| Wheel | with the tape |
|
|
|
| wheel facing up |
|
|
|
| and the tape |
|
|
|
| window facing |
|
|
|
| out. The |
|
|
|
| cassette should |
|
|
| Tape | slide easily into |
|
|
| the holder. Do | |
Push Here to |
| SP/SLP | Window | |
|
| not force the | ||
Close Cassette | EJECT | Button |
| |
| cassette. | |||
Compartment | Button |
|
|
Before inserting a cassette, turn the tape wheel on the side of the cassette in the direction shown to remove any slack in the tape.
Tape Wheel
Cassette Care and Storage
•When you are finished with a cassette, rewind it, remove it from the camcorder, and label it.
•Store cassettes vertically in their protective cases at normal room temperatures. Do not leave your camcorder or cassettes in a car or outdoors for an extended period. Excessive heat or cold might damage your cassettes.
•Keep the cassette away from strong magnetic fields such as electric motors and other devices.
1.Open the LCD monitor at least 60˚ before opening the cassette holder.
2.Slide EJECT. The cassette holder opens automatically.
3.Insert the cassette with the tape wheel facing up and tape window facing out.
4.Press on the area labeled PUSH until the cassette holder locks into place.
•Keep dust from entering the cassette compartment. All dust is abrasive and causes excessive wear on the tape and the camcorder’s recording or playback heads.
•Do not use cassettes with damaged or spliced tape.
•Do not use a cassette if it has been damaged or exposed to moisture. The tape might jam and/or damage your camcorder.
23