Recording
Time-Lapse Recording (continued)
INT. TIME
OFF
15S
30S
1MIN
5MIN
EXIT
5.Rotate the menu PUSH dial down to highlight the desired time between recordings (15S, 30S, 1 MIN, or
5 MIN).
•Select 15S to delay the recording for 15 seconds.
•Select 30S to delay the recording for 30 seconds.
•Select 1 MIN to delay the record- ing for one minute.
•Select 5 MIN to delay the record- ing for five minutes.
•Select OFF if you do not want the camcorder to delay recording.
6.Press the menu PUSH dial in to display the menu again. Rotate the menu PUSH dial to highlight REC TIME and press it in to display the REC TIME menu.
REC TIME
OFF 1/4 S 1/2 S
1S
5S
EXIT
7.Rotate the menu PUSH dial to highlight the amount of time you want the camcorder to record.
•Select 1/4S to record for 1/4 second.
•Select 1/2S to record for 1/2 second.
•Select 1S to record for one second.
•Select 5S to record for five seconds.
•Select OFF if you do not want to record for a selected amount of time.
8.Press the menu PUSH dial twice to exit the menus.
and the amount of recording time
and 
and the amount of interval time between recordings appear in
the viewfinder or on the LCD monitor.
15S 
5S
9.Press the thumb trigger to start recording.
Note: The camcorder starts and stops recording the selected amount of time. The tally light flashes with the flash speed increasing five seconds before recording begins.
Note: Fade does not operate during animation or
To Stop Time-Lapse Recording
Set the REC TIME and INT. TIME in the
menus to OFF.
53