Recording
Date and Time Displays
Press F2 to select mode.
NOV 18. 96
Date Display
AUTO DATE
Auto Date Display
NOV 18. 96 PM 11:59
Date/Time Display
Viewfinder Displays
NOV 18. 96
TV
Date Off Display
TAYLOR WAYNE
Created Title Display
NOV 18. 96
Return to Date Display
The mode selected will be recorded.
To Record the Date, Time, or Title Display on Your Tape
1.Place the camcorder in record pause.
2.Place scene select AE in MAN.
Note: Whenever the scene select AE dial is in AUTO, AUTO DATE is automatically selected.
3.Press MODE until DISPLAY appears beside the F2 button in the display panel.
4.Repeatedly press F2 to display the date, time or title you have previously stored in the viewfinder.
If you select AUTO DATE, it will automatically appear, be recorded for five seconds, and then disappear whenever:
•The date has been set or changed.
•This display mode has just been selected.
•The tape has been changed or the tape compartment opened.
5.Press F2 to remove the display from the viewfinder when you are finished recording it.
6.To record the display again, place the camcorder in record pause and press F2.
49