Recording
Edit Insert (Remote Only)
Edit insert lets you record new video in place of previously recorded video without
replacing the audio.
COUNTER R/M Button
VCR
POWER
OFF
CAMERA
| AUDIO |
| RF |
. | DC OUT |
| VIDEO |
PLAY/PAUSE
Button
L
E
N
S
C
O
V
RE
REW Button
START/STOP
ZOOM | SELF |
|
PLAY | INT. |
|
TIME |
| |
TIME LAPSE |
| |
PLAY |
| |
Button | REC |
|
| TIME |
|
STOP | ANIM. | PAUSE |
PAUSE | ||
REW |
| Button |
REW | FF |
|
Button |
|
|
INSERT A.DUB
INSERT
Button
POWER Switch in VCR
To Edit Insert
1.Place the tape with safety tab intact into the camcorder.
2.Place POWER switch in VCR.
3.Locate the place you want the edit insert to stop and press PLAY/PAUSE (PAUSE on remote).
4.Press COUNTER R/M for more than two seconds on the camcorder to set the time counter back to 0:00:00.
5.Press COUNTER R/M again for less than one second to turn on memory stop (M).
6.Press REW, locate the place you want edit insert to begin, and press PLAY/PAUSE (PAUSE on remote) exactly at the beginning of the scene.
7.Press INSERT and PAUSE on the remote together to place the camcorder in edit insert standby.
and appear in the viewfinder.
Display in Viewfinder
Note: To dub new audio at the same time, press A.DUB and PAUSE together. Press INSERT and PAUSE together to return to the
8.Press START/STOP on remote (thumb trigger on camcorder) to start edit
insert. appears in the viewfinder. New video is recorded over the previous video. When the counter reading of M 0:00:00 is reached, edit insert stops and the camcorder enters playback.
Note: The camcorder may stop slightly before or after the edit out point and there may be slight distortion at this point.
53