RCA CC634 manual Attaching the Shoulder Strap, To Attach the Shoulder Strap

Recording

Attaching the Shoulder Strap

The camcorder’s shoulder strap is designed to let you carry the camcorder from your shoulder and – when you are ready to shoot – bring the camcorder to shooting position in one quick movement.

To Attach the Shoulder Strap

1. If the strap keeper is
over a double section
of the strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap between	Keeper
the buckle and the
end of the strap as
shown.

4.Attach the other end of the strap to the other shoulder strap attachment ring.

– +

VCR

POWER

OFF

CAMERA

		AUDIO
BATT.		RF
	RELEASE	DC OUT
		VIDEO

2.Loop the end of the strap over the top of the shoulder strap attachment ring.

Buckle Keeper

		L
		V
–	+	RE

5.Adjust the shoulder strap to the desired length.

6.Slide both keepers up snugly against the shoulder strap attachment rings to prevent the strap from slipping.

Attachment		VCR
		CAMERA
		POWER
		OFF
Rings
		AUDIO
BATT.		RF
	RELEASE	DC OUT
		VIDEO

3.Thread the end of the strap back through the keeper and buckle making sure it is threaded under the outer strap. Make sure the strap is not twisted.

Cautions: When carrying the camcorder with the shoulder strap, you may find it convenient to rotate the viewfinder down and slide it to the front. This helps prevent possible damage to the viewfinder from bumping against your body as you move.

Make sure the shoulder strap is firmly attached before using it to carry the camcorder.

56