RCA CC634 manual Playback

Playback

Viewfinder Playback and Playback Features

TRACKING Buttons

EJECT						PLAY/PAUSE	PLAY
							Button
Button						Button
				––SET			STOP
			DATE/TIME/CHAR
			T20•30•40	TRACKING
			UNTERR/M			STOP Button
			.	+	L		Button
			W.BAL	STOP PLAY/PAUSE	E
			REW		C
				FF	N
					S
					O
–					V
	+				E
			B		R	FF Button
							REW
						REW Button	Button
			VCR
			POWER
			OFF
			CAMERA
			AUDIO			POWER Switch in VCR
	BATT.		RF
		RELEASE	DC OUT
			VIDEO

POWER Indicator

	START/STOP
ZOOM	SELF
	INT.
	TIME
PLAY	TIME LAPSE
	REC
	TIME
STOP	ANIM.
	PAUSE
REW	FF
INSERT	A.DUB

PAUSE

Button

FF

Button

Viewfinder Playback

Viewfinder playback is the simplest way to watch tapes using the camcorder.

To Play Back a Tape

1.Place POWER switch in VCR. The power indicator will light.

2.Slide EJECT and insert the cassette you want to play back. Close the cassette compartment.

3.Press PLAY/PAUSE to begin playback. If necessary, adjust tracking.

During playback, use the playback features.

4.Press STOP when you are finished.

Visual Searching

•During playback, press and release FF or REW if you want to search the tape visually in forward or reverse.

•Press PLAY/PAUSE on the camcorder (or PLAY on the remote) to return to normal playback.

•For brief searching, press and hold FF or REW for more than two seconds.

•Release the button to return to normal playback.

Stop-Action Pause

•During playback, press PLAY/PAUSE on the camcorder (or PAUSE on the remote) to “stop the action” and view one frame of the tape.

Caution: Pause is designed for momentary interruptions and should not be used for an extended period of time. If the camcorder remains in pause for more than five minutes, it will automatically enter the stop mode and then turn off to prevent excessive tape wear.

•Press PLAY/PAUSE on the camcorder (or PLAY on the remote) to return to normal playback.

Tracking

During playback, streaks may appear in the playback picture. Press either TRACKING button to move the streaks up or down and out of the picture.

•During stop-action playback, pressing one TRACKING button may reduce picture “jitter” (picture bouncing up and down). Some “jitter” is normal.

Simultaneously press both TRACKING buttons to return tracking to its preset center.

Note: The TRACKING buttons may have no effect on tapes recorded on other camcorders or VCRs.

57