Sanyo VCC-6594 Mounting the Lens, Check the lens mount, Remove the lens mount cap from the camera

L53H4/US (VCC-6594) GB 2001, 11, 9

MOUNTING THE LENS

Please use a DC type auto-iris lens (sold separately).

1

C mount type lens 2

Check the lens mount

Do not use a lens if the length “L” is more than 5 mm. That may damage the camera and prevent proper installation.

L

1Remove the lens mount cap from the camera.

3

2

CS mount type lens

2Install the auto-iris lens. CS mount type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mount type lens

To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully align the lens mount with the camera opening and turn the lens slowly to install it.

3Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.

When using lenses from other makers, the plug shape may not correspond to the terminal on the camera. In such a case, remove the original plug and using a soldering iron, connect the supplied lens iris plug according to the diagram. (Refer to page 9.)

8 English