Lens iris output connector Lens | Sanyo VCC-6594 guide

Sanyo VCC-6594 Lens iris output connector Lens, Camera setup section under the cover

Page 9

L53H4/US (VCC-6594) GB 2001, 11, 9

9Lens iris output connector (LENS)

This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.

9	These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However,

	if due to installation conditions or environment the settings may need to be modified for best results (see
	"SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover.

NOTE: When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the A.I. LENS switch to the VIDEO position.

6 English

Image 9

Contents

About this manual Color CCD CameraExclusions Plummer Street Contents AccessoriesFeatures Information to User For the customers in CanadaPour la clientèle canadienne Precautions Line phase adjustment volume Line Phase Video output connector Video OUT BNC typePower input terminal Power indicator PowerLens mount cap Hole 1/4-20 UNCCamera setup section under the cover Lens iris output connector LensConcerning AUTO-IRIS Lenses If using a Video type auto-iris lensDC type auto-iris lens Video type auto-iris lensCheck the lens mount Mounting the LensRemove the lens mount cap from the camera Mount type lensFlange-back adjustment Rewiring the lens cable in the lens iris plugCoaxial cable type and maximum length ConnectionsSettings Automatic Gain Control AGC setting Electronic shutter settings and electronic iris settingsTable a switch 1 ~ 60AI 100 500 1000 2000 4000 ApertureThis camera has two different backlight Backlight compensation settingLens iris adjustment White balance adjustmentLine phase adjustment Troubleshooting No picture on the monitor screenPicture is not clear Specifications