Sanyo VCC-6594 Parts Names, Video output connector Video OUT BNC type, Power input terminal

Page 7

L53H4/US (VCC-6594) GB 2001, 11, 9

PARTS NAMES

		Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
1	4	2 Line phase adjustment volume (LINE PHASE)
	4
		When using two cameras or more, the image on the monitor may roll vertically when switching sources. This

	3	rolling can be minimized by turning this volume.
	3

24 V AC input terminal (AC 24 V, GND)

Comes on when the power to the camera is on.

4 English

Image 7

Contents About this manual Color CCD CameraExclusions Plummer Street Accessories ContentsFeatures For the customers in Canada Information to UserPour la clientèle canadienne Precautions Power indicator Power Video output connector Video OUT BNC typeLine phase adjustment volume Line Phase Power input terminalLens mount cap Hole 1/4-20 UNCCamera setup section under the cover Lens iris output connector LensVideo type auto-iris lens If using a Video type auto-iris lensConcerning AUTO-IRIS Lenses DC type auto-iris lensMount type lens Mounting the LensCheck the lens mount Remove the lens mount cap from the cameraFlange-back adjustment Rewiring the lens cable in the lens iris plugCoaxial cable type and maximum length ConnectionsSettings Aperture Electronic shutter settings and electronic iris settingsAutomatic Gain Control AGC setting Table a switch 1 ~ 60AI 100 500 1000 2000 4000This camera has two different backlight Backlight compensation settingLens iris adjustment White balance adjustmentLine phase adjustment No picture on the monitor screen TroubleshootingPicture is not clear Specifications