Sanyo VCC-6594 instruction manual Hole 1/4-20 UNC, Lens mount cap

Page 8

L53H4/US (VCC-6594) GB 2001, 11, 9

PARTS NAMES

5		7
5	6
	6
8
1	2	3 2
	1
1 Shorter screws: M3 x 4
2 Longer screws: M3 x 6
3 Camera mounting screw
hole: 1/4"-20 UNC
English 5

5Lens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

6Flange-back adjustment screw (FLANGE BACK ADJ.)

7Flange-back lock screw (FLANGE BACK LOCK)

8Camera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

When installing the camera support, select a location that can support the total weight of the camera and accessories.

Image 8

Contents Color CCD Camera About this manualExclusions Plummer Street Features ContentsAccessories Pour la clientèle canadienne Information to UserFor the customers in Canada Precautions Video output connector Video OUT BNC type Line phase adjustment volume Line PhasePower input terminal Power indicator PowerHole 1/4-20 UNC Lens mount capLens iris output connector Lens Camera setup section under the coverIf using a Video type auto-iris lens Concerning AUTO-IRIS LensesDC type auto-iris lens Video type auto-iris lensMounting the Lens Check the lens mountRemove the lens mount cap from the camera Mount type lensRewiring the lens cable in the lens iris plug Flange-back adjustmentConnections Coaxial cable type and maximum lengthSettings Electronic shutter settings and electronic iris settings Automatic Gain Control AGC settingTable a switch 1 ~ 60AI 100 500 1000 2000 4000 ApertureBacklight compensation setting This camera has two different backlightWhite balance adjustment Lens iris adjustmentLine phase adjustment Picture is not clear TroubleshootingNo picture on the monitor screen Specifications