Powering the Camcorder
Using the Battery to Power Your Camcorder
POWER Switch
and Indicator
BATTERY
Eject Switch
Rechargeable
Battery
Hold Battery
Flush and
Slide Down
Align Arrows
Attach Charged Battery
1.Align reference arrow on battery with arrow on camcorder. Hold battery flush against camcorder while sliding it down in the direction of the arrow as shown.
2.Press and hold small button on POWER while placing it in CAMERA. POWER indicator will light if battery is properly attached.
Remove the Battery
1.Slide POWER to OFF. POWER indicator will turn off.
2.Press and hold BATTERY eject while sliding battery up and off the camcorder.
ATTENTION: |
| |
OF PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED |
| |
USES A RECHARGEABLE BATTERY. AT THE END OF ITS |
| |
USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT |
| |
MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE | Pb | |
MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL | ||
| ||
SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR |
| |
RECYCLING OPTIONS OR PROPER DISPOSAL. |
|
12