Recording on the Camcorder from a VCR or TV
Installation
1Attach the white plug on one end of the audio/video cable to the AUDIO OUT jack on the VCR (or TV monitor).
Note: If your VCR or TV monitor has stereo left and right AUDIO OUT jacks, attach the plug to the one labeled MONO. If one of the audio jacks is not labeled MONO, you may need a
2Attach the yellow plug on the same end to the VIDEO OUT jack on the VCR (or TV monitor).
3Attach the yellow plug on the other end of the audio/video cable to the yellow VIDEO jack and the white plug to the white AUDIO jack on the side of the camcorder.
4Place the AV OUT/IN switch to IN.
Recording Operation and How to Copy Tapes on the Camcorder
1.A. Camcorder connected directly to TV monitor: Turn on the TV and tune it to the channel you want to record.
B.Camcorder connected to a VCR that is already connected to a TV: Turn on the VCR and select the channel you want to record (or place the cassette you want to copy in the VCR). If you are copying a tape, press PLAY on the VCR when you are ready to start copying.
Note: If you want to see what is being recorded, turn on the TV and tune it to the channel that you normally use to see the signal from the VCR.
2.Press and hold the small button on the camcorder’s POWER switch while sliding it to CAMERA.
3.Insert a cassette in the camcorder with the safety tab intact.
4.Press REC/PAUSE to start the camcorder recording.
Note: If you are copying a tape, start the VCR playing the tape.
5.Press REC/PAUSE on the camcorder when you are finished.
Remember: Place the AV OUT/IN switch to OUT to record on the camcorder.
Caution: The unauthorized recording of television programs and other materials may infringe the rights of others.
41