CCTV Tester
3.4.6Selection 6: Multimeter. Use the tester as a digital multimeter to measure AC/DC voltage and resistance.
NOTE: The tester displays the Vpp of the video signal and sync signal on the LCD without the use of the test leads. See Menu Item #4 on page 14.
CONNECTION: Connect the 2 test leads to the bottom of the tester as shown in Figure
Figure 3-10. DMM test leads attached to bottom of tester.
SELECT MULTIMETER MODE: Press “6” on the keypad to turn ON the DMM (digital multimeter).
DC: 121.3 MV
1 DC VOLTAGE
2 AC VOLTAGE
3 RESISTANCE
Figure 3-11. Digital multimeter menu.
SELECT FUNCTION: Press key 1, 2 or 3.
DC voltage test range: 0-1000 V, precision: 0.1 mV
AC voltage test range: 750 V, precision: 0.1 mV
Resistance test range: 0-40 Mohm , precision: 0.1 ohm
RETURN TO MAIN MENU: Hold the Main Menu key to return to the Main Menu.
NOTE: Exercise caution when voltage is present. If you are not familiar with proper safety techniques, ask for guidance. Do not exceed the testing range (above) or damage may occur.
Page 22 |
|