TRENDnet User’s Guide
Basic >> User
Administrator: To prevent unauthorized access to the camera’s Web Configuration, you are strongly recommend to change the default administrator password. Type the administrator password twice to set and confirm the password.
General User
-User Name: Enter the user’s name you want to add to use the camera.
-Password: Enter the password for the new user. When you are finished, click Add/Modify to add the new user to the camera. To modify the user’s information, select the one you want to modify from UserList and click Add/Modify.
-UserList: Display the existing users of the camera. To delete a user, select the one you want to delete and click Delete.
Guest
-User Name: Enter the guest’s name you want to add to use the camera.
-Password: Enter the password for the new guest.
-UserList: Display the existing guests of the camera. To delete a user, select the one you want to delete and click Delete.
TV-IP322P
NOTE: The “General User” is allowed to access the camera and control the Function buttons on the Main screen of the Web Configuration.; the “Guest” can only view the live view image from the Main screen while accessing the camera. Only the “Administrator” is allowed to configure the camera through the Web Configuration.
Direct Video Stream Authentication:
To steam the video directly without going through the configuration page, you can access it via Internet.
-Enable: User needs to enter user name and password to stream the camera.
-Disable: User can stream the camera without entering the user name and password.
Examples of the direct link to video:
H.264 Mode
http://camera_ip_address:port number/h264view.htm
MPEG4 Mode
http://camera_ip_address:port number/mpgview.htm
MJPEG Mode
http://camera_ip_address:port number/jpgview.htm
NOTE: This feature is enabled by default, and for security reason, it is recommended to have the feature enabled at all time.
© Copyright 2012 TRENDnet. All Rights Reserved.
17