TRENDnet User’s Guide
The Apple Safari is already with Bonjour. You can download the complete Bonjour for Internet Explorer browser from Apple's web site by visiting http://www.apple.com/bonjour/.
RTSP
-RTSP Streaming: The camera supports three levels of RTSP access. The default RTSP Port is 554.
Disable | RTSP link does not require authentication. |
| No username/password required. |
Basic | RTSP link prompts for authentication. |
| Username/password are transmitted in plain text. |
Digest | RTSP link prompts for authentication. |
| Username/password are encrypted during data |
| transmission. |
TRENDnet recommends using RTSP Digest authentication method. Disable and basic methods pose security risks. Please verify if your RTSP client supports RTSP authentication method selected.
-Multicast settings: Configure the following settings so that you can deliver information from your camera to a set of receivers.
Group IP | Assign a category of IP addresses to receive the |
| information from the camera. |
|
|
H.264 Port | Assign a multicast port for H.264 in the text box. |
| The default port is 1234. |
|
|
MPEG4 | Assign a multicast port for MPEG4 in the text box. |
Port | The default port is 1236. |
|
|
Audio Port | Assign a multicast port for audio in the text box. |
| The default port is 1238. |
|
|
TTL | Set the TTL value from 1 to 255, which is used to |
| modify the time to live field in the IP header. |
|
|
TV-IP322P
QoS
-Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video from the camera.
-Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream audio from the camera.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the Accept option to assign the range of IP addresses that are allowed to access the camera, or select the Deny option to assign the range of IP addresses that are blocked to access the camera.
Disable: Select this option to disable the IP Filter function of the camera.
Accept
-IPv4: Assign a range of IP addresses that are allowed to access the camera by entering the Start IP address and End IP address options. When you are finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.
© Copyright 2012 TRENDnet. All Rights Reserved.
20