TRENDnet TVIP322P manual Technical Specifications, Gpio

Page 41

TRENDnet User’s Guide

5.Go to Virtual Server* section and create a new entry. Enable: Click Enable

Name: Enter the application name (eg. Camera Name)

Protocol: Select TCP

Private Port: The HTTP port that you assign on your Camera.

Public Port: The port used on remote side to access to your Camera.

LAN Server: The local IP address of your Camera.

Click Add to add the application.

*Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar.

6.Open another web browser and enter your DDNS domain and camera’s port number.

http://yourDomainName:PortNumber

7.The camera login page will appear.

TV-IP322P

Technical Specifications

Camera

General

Sensor: 1/3” Megapixels color CMOS sensor

 

Resolution: 1280 x 1024 pixels

 

Board Lens

 

Focal Length: 12mm

 

Aperture (F/No): F1.8

 

Minimum illumination: 0 Lux (Night vision)

 

Viewing Angle :

 

Diagonal: 28.5 degree

 

Horizontal: 22.7 degree

 

Vertical : 17.2 degree

Image & Video

Compression: H.264, MPEG-4, and MJPEG

 

Exposure/white balance/gain control : automatic

 

Built-in ICR

 

 

Audio

External microphone in

 

Sensitivity: -48dB +/- 3dB

 

Frequency:50~16000Hz

 

S/N: >60dB

 

Format: PCM/AMR

 

 

Pan/Tilt/Zoom

Protocol: Pelco D, Pelco P

 

32 presets

 

Auto Patrol

 

 

GPIO

Ground, GPIO in/out, RS485, 12V DC, 24V AC

 

 

SD Slot

Supports SD/SDHC (up to 32GB)

 

 

 

Hardware

 

 

Network

IEEE 802.3u 10/100Mbps Fast Ethernet

 

IEEE 802.3af PoE

 

 

 

© Copyright 2012 TRENDnet. All Rights Reserved.

40

Image 41
Contents Page Contents Product Overview Package ContentsFeatures Camera Overview Product Hardware FeaturesApplication Diagram InstallationTV-IP322P Waterproofing Hardware Feature Camera FocusSD Card Slot Click the Install Camera Camera InstallationTV-IP322P Starting Camera Finder IPSetup Click StartProgramsTRENDnetIPSetup, and then click IPSetup Click InstallViewing Camera Basic Function Configuration Function Buttons  Live View/Setup SwitchSelect ToolsInternet Options Select Security Configuring the Camera Setting IP Setting  Camera Setting Email Settings Smart WizardBasic  Confirm SettingsBasic Date & Time Basic SystemBasic User  Direct Video Stream Authentication General User  GuestNetwork Network Network Https  Ports NumberNetwork Advanced  Rtsp  Deny Video & AudioVideo & Audio Video  H.264 Video & Audio Camera  Image Setting Mjpeg  MPEG4Video & Audio Audio Video & Audio Overlay / MaskVideo & Audio Overlay / Mask Text Overlay  Http Notify For Motion Trigger Event Server FTP Event Server Setting FTPEvent Server Setting Email  Email Event Server Setting Network Storage  Network Storage  Instant Message Event Server Setting Instant MessageMotion Detect Event Config Event Configuration Motion Detect Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerTools RS-485 RS-485 RS-485 Setting Patrol Position  Preset PositionRS-485 Patrol  SD Card Setting SD Card SD Card SettingSD Card SD Card File ManagerDevice Info Device Info Device InfoConfigure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your router Gpio Technical SpecificationsSmtp LEDIP Setup is unable to detect my camera. What should I do? TroubleshootingWindows Vista Windows XPForgot my password. What should I do? When I click on Live View the image does not load?TV-IP322P 3 Years Limited Warranty Limited Warranty