TRENDnet TVIP322P manual Tools

Page 33

TRENDnet User’s Guide

Tools

The Tools menu provides the commands that allow you to restart or reset the camera. You can also backup and restore your configuration, and upgrade the firmware for the camera.

Factory Reset: Click Reset button to restore all factory default settings for the camera. You can also do the physical reset by press the reset button on the camera. Please refer to trouble shooting section question 2 for more detail.

System Reboot: Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained after rebooting.

Configuration: You can save your camera configuration as a backup file on your computer. Whenever you want to resume the original settings, you can restore them by retrieving the backup file.

TV-IP322P

-Backup: Click Get the backup file to save the current configuration of the camera.

-Restore: Click Browse to locate the backup file and then click Restore.

Update Firmware: You can upgrade the firmware for your camera once you obtained a latest version of firmware.

-Current Firmware Version: This item displays the current firmware version.

-Select the firmware: Click Browse to locate the backup file and then click Update.

NOTE Make sure to keep the camera connected to the power source during the process of upgrading firmware. Otherwise, the camera might be damaged because of failure of upgrading firmware.

© Copyright 2012 TRENDnet. All Rights Reserved.

32

Image 33

Contents Page Contents Package Contents FeaturesProduct Overview Camera Overview Product Hardware FeaturesApplication Diagram InstallationTV-IP322P Hardware Feature Camera Focus SD Card SlotWaterproofing Click the Install Camera Camera InstallationTV-IP322P Starting Camera Finder IPSetup Click StartProgramsTRENDnetIPSetup, and then click IPSetup Click InstallViewing Camera Basic Function Configuration Function Buttons  Live View/Setup SwitchSelect ToolsInternet Options Select Security Configuring the Camera Setting IP Setting  Camera Setting Email Settings Smart WizardBasic  Confirm SettingsBasic Date & Time Basic SystemBasic User  Direct Video Stream Authentication General User  GuestNetwork Network Network Ports Number Network Advanced Https  Rtsp  Deny Video & AudioVideo & Audio Video  H.264 Video & Audio Camera  Image Setting Mjpeg  MPEG4Video & Audio Audio Video & Audio Overlay / MaskVideo & Audio Overlay / Mask Text Overlay  Http Notify For Motion Trigger Event ServerEvent Server Setting FTP Event Server Setting Email  Email FTP Event Server Setting Network Storage  Network Storage Event Server Setting Instant Message Motion Detect Instant Message Event Config Event Configuration Motion Detect Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerTools RS-485 RS-485 RS-485 Setting Preset Position RS-485 Patrol Patrol Position  SD Card Setting SD Card SD Card SettingSD Card SD Card File ManagerDevice Info Device Info Device InfoConfigure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your router Gpio Technical SpecificationsSmtp LEDIP Setup is unable to detect my camera. What should I do? TroubleshootingWindows Vista Windows XPForgot my password. What should I do? When I click on Live View the image does not load?TV-IP322P 3 Years Limited Warranty Limited Warranty