TRENDnet TVIP322P manual  MPEG4,  Mjpeg, Video & Audio Audio, Video & Audio Overlay / Mask

Page 24

TRENDnet User’s Guide

-Video Quality: Select the desired image quality from five levels: Lowest, Low, Medium, High, and Highest.

-Frame Rate: Select Auto or a proper setting depending on your network status.

MPEG4

-Video Resolution: Select the desired video resolution from the three

formats: VGA, QVGA and QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within your network.

-Video Quality: Select the desired image quality from five levels: Lowest, Low, Medium, High, and Highest.

-Frame Rate: Select Auto or a proper setting depending on your network status.

MJPEG

-Video Resolution: Select the desired video resolution from the four

formats: SXGA, VGA, QVGA and QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within your network.

-Video Quality: Select the desired image quality from five levels: Lowest, Low, Medium, High, and Highest.

-Frame Rate: Select Auto or a proper setting depending on your network status.

NOTE The camera supports H.264, MPEG4 and MJPEG compression. Please note that that MJPEG mode captures the images in JPEG format, which requires higher bandwidth to view smooth video. You can control the bandwidth of each connection well through the setting options above. For the bandwidth information, refer to the Appendix, Bandwidth Reference Guide.

3GPP: The camera supports 3GPP specification. Select the Disable option to disable this feature. Otherwise, select 3GPP Without Audio or 3GPP With Audio to transfer the video clips without or with audio.

If you use a mobile phone that supports 3GPP, you can also view the real-time streaming image captured by the camera on your phone (with the default player on the phone) by entering the RTSP link: rtsp://(IP address of the camera)/3gp.

NOTE Your mobile phone and the service provider must support 3GPP function. Please contact your service provider when you are failed to use this service.

TV-IP322P

Video & Audio >> Audio

Camera Microphone In: Select the Enable option to enable the camera’s audio function, so that you can receive the on-site sound and voice from the camera.

Camera Speaker Out: Select the Enable option to enable the camera’s external speaker function, so that the connected speaker can play the sound and voice through the camera. Change the volume by entering the proper value in the Volume option. The default setting is 90.

Video & Audio >> Overlay / Mask

© Copyright 2012 TRENDnet. All Rights Reserved.

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Contents Package Contents FeaturesProduct Overview Product Hardware Features Camera OverviewInstallation Application DiagramTV-IP322P Hardware Feature Camera Focus SD Card SlotWaterproofing Camera Installation Click the Install CameraTV-IP322P Starting Camera Finder IPSetup Click Install Click StartProgramsTRENDnetIPSetup, and then click IPSetupConfiguration Viewing Camera Basic Function Live View/Setup Switch  Function ButtonsConfiguring the Camera Setting Select ToolsInternet Options Select Security Camera Setting  IP Setting Email Settings Smart Wizard Confirm Settings BasicBasic System Basic Date & Time Direct Video Stream Authentication Basic User General User  GuestNetwork Network Network Ports Number Network Advanced Https  Rtsp Video & Audio  DenyVideo & Audio Camera  Image Setting Video & Audio Video  H.264 MPEG4  MjpegVideo & Audio Audio Video & Audio Overlay / MaskVideo & Audio Overlay / Mask Text Overlay Event Server  Http Notify For Motion TriggerEvent Server Setting FTP Event Server Setting Email  Email FTP Event Server Setting Network Storage  Network Storage Event Server Setting Instant Message Motion Detect Instant Message Event Config Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger Event Configuration Gpio TriggerTools RS-485 RS-485 Setting RS-485 Preset Position RS-485 Patrol Patrol Position SD Card SD Card Setting  SD Card SettingSD Card SD Card File ManagerDevice Info Device Info Device InfoHow to setup/access the camera behind a Router Configure Ddns on your CameraProtocol Select TCP Configure Ddns on your router Technical Specifications GpioLED SmtpTroubleshooting IP Setup is unable to detect my camera. What should I do?Windows Vista Windows XPWhen I click on Live View the image does not load? Forgot my password. What should I do?Limited Warranty TV-IP322P 3 Years Limited Warranty
Top Page Image Contents