SonicWALL SRA 1200/4200 manual Uploading a New SRA SSL VPN Image, Uploaded Firmware New

Page 44

Uploading a New SRA SSL VPN Image

Note: SonicWALL SRA 4200/1200 appliances do not support downgrading an image and using the configuration settings file from a higher version. If you are downgrading to a previous version of a SRA SSL VPN image, you must select Uploaded Firmware with Factory Defaults – New! You can then import a settings file saved from the previous version or reconfigure manually.

To upload new firmware on the appliance:

1.Download the SRA SSL VPN image file from www.mysonicwall.com and save it to a location on your local computer.

2.Select Upload New Firmware from the System > Settings page. Browse to the location where you saved the SRA SSL VPN image file, select the file, and click the Upload button. The upload process can take up to one minute.

On a SonicWALL SRA 4200/1200, you are ready to reboot your appliance with the new SRA SSL VPN image.

Do one of the following:

1.To reboot the image with current preferences, click the boot icon for the following entry:

Uploaded Firmware – New!

2.To reboot the image with factory default settings, click the boot icon for the following entry:

Uploaded Firmware with Factory Defaults – New!

Note: Be sure to save a backup of your current configuration settings to your local machine before rebooting the SonicWALL SSL VPN appliance with factory default settings, as described in the previous “Saving a Backup Copy of Your Configuration Settings” section.

3.A warning message dialog is displayed saying Are you sure you wish to boot this firmware? Click OK to proceed. After clicking OK, do not power off the device while the image is being uploaded to the flash memory.

4.After successfully uploading the image to your SonicWALL SSL VPN appliance, the login screen is displayed. The updated image information is displayed on the System > Settings page.

SonicWALL SRA 1200/4200 Getting Started Guide Page 43

Image 44

Contents Getting Started Guide Document Contents SonicWALL SRA 1200/4200 Getting Started Guide2 Document Contents Setting Up Your Network This SectionMissing Items? Package Contents for the SonicWALL SRASRA 1200 System Requirements SRA 4200 System Requirements Recording Configuration Information Administrator InformationNetwork Configuration Information What You Need to BeginSelecting a Deployment Scenario Scenario OverviewsScenario B SRA on an Existing DMZ Applying Power to the SonicWALL SRA Accessing the Management InterfaceTroubleshooting Connecting Your Appliance Configuring Your SRA 1200/4200 Setting Your Administrator PasswordNavigate to Users Local Users Setting the Time ZoneAdding a Local User Configuring SRA Network Settings Configuring DNS / WinsConfiguring the X0 IP Address for Scenario B and Scenario C Click AcceptConfiguring a Default Route Adding a NetExtender Client Route Navigate to the NetExtender Client RoutesSetting Your NetExtender Address Range 192.168.200.100 toConnecting Your SRA 1200/4200 Scenario a Connecting Your Network InterfacesScenario B Connecting Your Network Interfaces Scenario C Connecting Your Network Interfaces20 Connecting Your SRA 1200/4200 Registering Your Appliance Creating a MySonicWALL Account Registering Your SonicWALL SRABefore You Register Product RegistrationServices and Licensing Service ManagementActivating Services and Software Flexible Per-User LicensingTrying or Purchasing Services 26 Services and Licensing Network Configuration Scenario a SRA on a New DMZUn-select the Allow Interface Trust checkbox Connecting to a SonicWALL Security ApplianceAdding a New SRA Custom Zone Enter your Subnet Mask Enter a name for the serviceAllowing a WAN SRA Connection Click Allowing an SRA LAN ConnectionNavigate to the Network Address Objects Name for NetExtender Scenario B SRA on an Existing DMZ PrerequisitesAllowing WAN DMZ Connection Allowing DMZ LAN Connection Continue to Testing Your Remote Connection on Configuring SRA LAN Connectivity Scenario C SRA on the LANName Name for NetExtender Zone Assignment Select Http and Https checkboxes, and click Next Setting Public Server AccessSelect the Public Server Wizard option and click Next Testing Your Remote Connection Verifying a User Connection from the Internet40 Testing Your Remote Connection Upgrading Your Appliance Exporting a Copy of Your Configuration Settings Obtaining the Latest SRA SSL VPN ImageUploaded Firmware New Uploaded Firmware with Factory Defaults NewUploading a New SRA SSL VPN Image Resetting the Appliance Using SafeMode Support and Training Options Customer Support Knowledge BaseUser Forums Training Related Documentation SonicWALL Live Product Demos SonicWALL Secure Wireless Network Integrated Solutions Guide Page Safety and Regulatory Information Lithium Battery Warning Cable ConnectionsKabelverbindungen Weitere Hinweise zur MontageHinweis zur Lithiumbatterie Declaration of Conformity Complies with EN 55022 Class a and CISPR22 Class aBmsi Statement Class a Regulatory Information for Korea SWL-1RK23-088Copyright Notice TrademarksSonicWALL SRA 1200/4200 Getting Started Guide 60 Notes SonicWALL, Inc