Sinar Hy6 manual Do not open the camera case, Handle the camera with care

Page 14

SAFETY INFORMATION

Do not open the camera case.

Any opening of the camera case is explicitly reserved to customer service. An arbitrary opening of the case leads to the expiry of the warranty claims. No liability will be assumed for personal injuries or damages caused by the arbitrary opening of the camera case.

Handle the camera with care.

The Sinar Hy6 is a sensitive, high precision optical instrument. Please handle it with the appropriate care. Avoid any agitation of the instrument and any soiling of the optical surfaces, and observe the advice for the care and the maintenance of the camera.

Do not insert any metal pieces into the electric contacts of the camera, of any accessory parts or into the cable connections. There is the danger of an electric shock or of damage to the camera and its component parts.

In the area of the operational elements at the camera body, the camera is equipped with a magnet. Please observe that magnetic fields may cause damage to watches, data carriers and magnet strips of cards etc. Please make sure not to place these devices nearby the camera.

2.2Advice Concerning the Camera

2.2.1Advice for the Prevention of Injuries

Do not open the camera case and do not disassemble the camera.

There is the danger of an electric shock. If the camera is open due to damage of the casing, do not touch the internal parts. Contact customer service.

To prevent the danger of explosion, do not use the camera nearby easily inflammable liquids or gas.

To prevent injuries to the eyes, do not focus the camera lens onto the sun or extremely hot light sources. In rare cases, the focusing of the camera onto extremely hot light sources can lead to an impairment of your vision capability.

If the camera has been dropped into water, or if the internal parts have got in contact with water, please remove the battery to prevent the danger of an electric shock. Do not use the camera any more. Contact customer service.

If any abnormal behaviour of the camera (e.g. smoke, noise, smell) occurs during operation, do not use the camera any more. Disconnect it from the power supply and / or remove the battery. Contact customer service before you use the camera again. In this way, injuries or damages can be prevented.

3

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Sinar Hy6 Trademarks CopyrightIntellectual Property Rights Regarding Photography Advice for Using This Manual General Advice and Structure of the ManualReferences AbbreviationsStructure of the manual Advice for Using this Manual Introduction Safety Information Sinar Hy6-e75 Sinar Hy6-e54 Sinar Hy6 m54Assembly Instructions for the Camera Inserting and removing the battery Charging the batteryViewfinder Display Shooting ModeOperational Elements at the Hand Grip 10.1Shooting Modes 14.1 Flash Operation with the Sinar Hy6 System 14.2Options Introduction Read the manual General AdviceSpare parts and accessories Operate the camera as intendedDo not open the camera case Handle the camera with careDo not touch the internal parts of the camera Avoid strong magnetic fieldsAvoid contact with sand, dust, toxic gas, water etc Do not use the camera under waterDo not store the camera near heat sources Cleaning of the cameraUse the lens protection cap Store the camera out of the reach of childrenKeep the battery and the battery charger away from fire Keep the battery and the battery charger away from waterDo not use damaged cables and accessories Do not let cables trail across the floorScope of Delivery Sinar Hy6-e75120 VAC, and a VDC car cigarette lighter cable Sinarback 54 MC including protection cover Sinar Hy6 Camera and its component parts Camera and ITS Component Parts Flash connection socket SCA-compatible Assembly Instructions for the Camera To open the waist-level viewfinder, pull it upwards Lever of the magnifying glass 90 reflex viewfinder 10 Attachment of the lens 11 Protection cover E54 LV 13 Assembly of the Sinarback eMotion 15 Attachment of the Sinarback eMotion 17 Sinarback 54MC with adapter kit 21 Adjustment of the hand grip 25 IEEE-1394 socket at the back 27 Focusing screen Frame. Place the format mask exactly onto Your Sinar Hy6 system Adjusting the Hand Strap 34 Adjust hand strap Working with a tripodBattery Inserting and removing the batteryBattery charger First Use of the Sinar Hy6 System First USE Operational Elements the Camera Functions at a Glance Operating Elements Operational Elements at the Camera Body Operational elements at the camera bodyExposure Mode Control Wheel W2 to set the shutter speed Light Metering Mode Light MeteringSingle Auto Focus ModeAuto Focus Hot Shoe Factory ResetFlash Options Measurement is possibleFocus and Focus Indication at the Lens 14 Focus indication at the lensEasy Mode Easy ModeEnhanced Mode Display in Enhanced Mode3 4 5 6 7 8 Focusing Auto Focus Single and Auto Focus ContinuousManual Focus Manual Focusing 10.2.2Display Focus Setting Focus Indication in the Viewfinder DisplayExposure Light Metering Modes Introduction Operational Area Light MeteringSpot Light Metering Centre-weighted Light Metering Operational Area Exposure Modes Exposure Exposure Modes Light balance in the hand grip and the viewfinder display Select Bulb with the Rear Control Wheel W2 Display AE-Lock Enhanced Mode Exposure Exposure Compensation Exposure Setting the ISO-SPEED Shooting Modes When the shutter is released, the display changes Menu Shooting / Self-Timer Menu Shooting Focus Trap Menu Shooting Ultra Fast Select the exposure deviation Using the Front Control Wheel W1Function with the Rear Control Wheel W2 Number of images in the bracketing seriesWhen bracketing is started, the display settings change Focus Bracketing is only possible with AF or AFD-lenses Mirror Up Interface Hot Shoe TTL-Flash Measurement and SCA-interfaceHot shoe X-contact Normal Flash CompensationOptions Set the enhanced or the easy GUI as standardMenu Options Controls Release button Key lock Menu Options Firmware version11 Menu Options Voltage status Remove the cover Attach the magazine frameOpen the magazine Take out film insertLoad a film Insert the film insertClose the film magazine Close fílm magazineCleaning and Maintenance Technical Data Connections TTL flash metering on the film plane 5x6 cm Film magazine 4560 with integrated laminar drawslide

Hy6 specifications

The Sinar Hy6 is a medium format camera that has garnered a reputation among photographers for its innovative design and advanced features. Characterized by its modular system, the Hy6 is ideal for both studio and location work, offering flexibility and ease of use that encourages creativity.

One of the standout features of the Sinar Hy6 is its digital back compatibility. Designed to accommodate a range of digital backs, including those from Sinar itself and other manufacturers, the Hy6 ensures that photographers can use the latest imaging technologies without being tied to a specific system. This flexibility allows artists to choose the digital back that best suits their workflow, whether they prefer CCD or CMOS sensors.

The camera boasts an impressive modular system which allows users to interchange various components. The camera body can be paired with different viewing platforms, including a waist-level viewfinder or an eye-level finder, catering to various shooting styles. Additionally, users can easily change lenses, supporting a variety of focal lengths including wide-angle, standard, and telephoto options. This modularity not only enhances functionality but also enables users to customize their kit according to specific projects or personal preferences.

Moreover, the Sinar Hy6 incorporates cutting-edge technologies such as an electronic shutter which facilitates silent operation, making it particularly suitable for sensitive environments. This electronic shutter can also synchronize with flash at high speeds, allowing for greater creative possibilities in studio and outdoor settings. The camera’s precise metering system aids photographers in achieving accurate exposures, even in challenging lighting conditions.

Another notable characteristic of the Sinar Hy6 is its ability to capture stunningly detailed images with a wide dynamic range. The medium format sensor produces high-resolution files that are ideal for large prints and detailed editing, ensuring that photographers achieve the desired quality for professional work. The camera also supports advanced imaging techniques, such as focus stacking, which is particularly useful in product photography and macro work.

In conclusion, the Sinar Hy6 represents a blend of innovation, flexibility, and high-quality performance in the medium format landscape. Its modular design, compatibility with various digital backs, and advanced imaging technologies make it a powerful tool for professionals seeking exceptional results in their photography endeavors. Whether in the studio or on location, the Hy6 stands out as a versatile option for capturing stunning images.
Top Page Image Contents