Sinar Hy6 manual Working with a tripod, Adjust hand strap

ASSEMBLY INSTRUCTIONS

1

2

2

Fig. 5 / 34 Adjust hand strap

Detach the hand strap from the camera body by removing the metal lugs 1 from the hand grip.

Two pins 2 are located on each side of the hand grip. With a needle-shaped object (e.g. a paperclip), push the pins inside. Simultaneously, pull the metal lugs out of the slots.

To re-attach the metal lugs, push the pins inside again and insert the lugs into the slots. You will hear a click when they are locked.

Check whether the hand strap is properly fixed by pulling it without pushing the pins inside.

5.10 Working with a tripod
	On the reverse side, the Sinar Hy6 system is
	equipped with a quick-clamp tripod plate
	accepting a quick-release camera platform
	“Novoflex Q-Base”.
	Two threads are in the quick-clamp-adapter
	plate with the following standard sizes:
1 2	1	1/4 ‘’ thread
	2	3/8 ’’ thread

A reducer for the 3/8’’ thread is included in the delivery.

Fig. 5 / 35 Tripod threads

31