Sinar Hy6 manual Keep the battery and the battery charger away from fire

Page 17

SAFETY INFORMATION

2.3Safety Advice Concerning the Battery and the Cables

Use only batteries that are recommended for the use with the Sinar Hy6 system. No liability will be assumed for any damages or injuries caused by the use of non-authorized batteries.

Operate the battery and the battery charger only as intended.

•Do not open or disassemble the battery or alter it in any way.

•Do not expose the battery to high temperatures.

•Do not insert the batteries in converse polarity.

•Do only use and charge the battery at the permitted operating temperatures.

Use only the batteries, battery chargers and other accessories that are explicitly recommended by the manufacturer.

Keep the battery and the battery charger out of the reach of children. Batteries can be damaged or swallowed, and can cause severe injuries. When charging the battery, make sure that the battery charger and the battery are out of the reach of children to avoid the danger of a life-threatening electric shock.

Keep the battery and the battery charger away from fire.

There is the danger of an explosion and of an electric shock.

Keep the battery and the battery charger away from water.

If the battery or the battery charger has become wet, do not use them until they are completely dried.

Do not use damaged batteries. If battery liquid is leaking from the battery, do not touch the battery liquid. A contact of the battery liquid with the eyes can lead to a loss of your vision capability!

If a battery shows visible damage, or if battery liquid is leaking from a battery, do not use this battery anymore. Avoid any contact of the liquid with the eyes, skin or clothes. If skin or eyes have been in contact with battery liquid, wash off the liquid with water and without rubbing, and consult a doctor immediately.

If a battery is changing color or form, or if smoke is emitting from the battery, take the battery out of the camera. Be careful not to burn your hands.

If a battery is changing color or form, if extreme heat occurs or if smoke is emitting from the battery during battery charging, disconnect the charger from the power supply to prevent the occurrence of fire.

To prevent the occurrence of fire, do not use the battery charger near inflammable gas or liquids.

6

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Sinar Hy6 Trademarks CopyrightIntellectual Property Rights Regarding Photography General Advice and Structure of the Manual Advice for Using This ManualAbbreviations ReferencesStructure of the manual Advice for Using this Manual Sinar Hy6-e75 Sinar Hy6-e54 Sinar Hy6 m54 Introduction Safety InformationInserting and removing the battery Charging the battery Assembly Instructions for the CameraOperational Elements at the Hand Grip Shooting ModeViewfinder Display 10.114.1 Flash Operation with the Sinar Hy6 System 14.2 Shooting ModesOptions Introduction Spare parts and accessories General AdviceRead the manual Operate the camera as intendedHandle the camera with care Do not open the camera caseAvoid contact with sand, dust, toxic gas, water etc Avoid strong magnetic fieldsDo not touch the internal parts of the camera Do not use the camera under waterUse the lens protection cap Cleaning of the cameraDo not store the camera near heat sources Store the camera out of the reach of childrenKeep the battery and the battery charger away from water Keep the battery and the battery charger away from fireDo not let cables trail across the floor Do not use damaged cables and accessoriesSinar Hy6-e75 Scope of Delivery120 VAC, and a VDC car cigarette lighter cable Sinarback 54 MC including protection cover Sinar Hy6 Camera and its component parts Camera and ITS Component Parts Flash connection socket SCA-compatible Assembly Instructions for the Camera To open the waist-level viewfinder, pull it upwards Lever of the magnifying glass 90 reflex viewfinder 10 Attachment of the lens 11 Protection cover E54 LV 13 Assembly of the Sinarback eMotion 15 Attachment of the Sinarback eMotion 17 Sinarback 54MC with adapter kit 21 Adjustment of the hand grip 25 IEEE-1394 socket at the back 27 Focusing screen Frame. Place the format mask exactly onto Your Sinar Hy6 system Adjusting the Hand Strap Working with a tripod 34 Adjust hand strapInserting and removing the battery BatteryBattery charger First Use of the Sinar Hy6 System First USE Operational Elements the Camera Functions at a Glance Operating Elements Operational elements at the camera body Operational Elements at the Camera BodyExposure Mode Control Wheel W2 to set the shutter speed Light Metering Light Metering ModeSingle Auto Focus ModeAuto Focus Flash Options Factory ResetHot Shoe Measurement is possible14 Focus indication at the lens Focus and Focus Indication at the LensEasy Mode Easy ModeDisplay in Enhanced Mode Enhanced Mode3 4 5 6 7 8 Auto Focus Single and Auto Focus Continuous Focusing10.2.2 Manual Focus Manual FocusingFocus Indication in the Viewfinder Display Display Focus SettingExposure Operational Area Light Metering Light Metering Modes IntroductionSpot Light Metering Centre-weighted Light Metering Operational Area Exposure Modes Exposure Exposure Modes Light balance in the hand grip and the viewfinder display Select Bulb with the Rear Control Wheel W2 Display AE-Lock Enhanced Mode Exposure Exposure Compensation Exposure Setting the ISO-SPEED Shooting Modes When the shutter is released, the display changes Menu Shooting / Self-Timer Menu Shooting Focus Trap Menu Shooting Ultra Fast Function with the Rear Control Wheel W2 Using the Front Control Wheel W1Select the exposure deviation Number of images in the bracketing seriesWhen bracketing is started, the display settings change Focus Bracketing is only possible with AF or AFD-lenses Mirror Up Hot Shoe TTL-Flash Measurement and SCA-interface InterfaceHot shoe X-contact Flash Compensation NormalSet the enhanced or the easy GUI as standard OptionsMenu Options Controls Release button Menu Options Firmware version Key lock11 Menu Options Voltage status Attach the magazine frame Remove the coverTake out film insert Open the magazineInsert the film insert Load a filmClose fílm magazine Close the film magazineCleaning and Maintenance Technical Data Connections TTL flash metering on the film plane 5x6 cm Film magazine 4560 with integrated laminar drawslide

Hy6 specifications

The Sinar Hy6 is a medium format camera that has garnered a reputation among photographers for its innovative design and advanced features. Characterized by its modular system, the Hy6 is ideal for both studio and location work, offering flexibility and ease of use that encourages creativity.

One of the standout features of the Sinar Hy6 is its digital back compatibility. Designed to accommodate a range of digital backs, including those from Sinar itself and other manufacturers, the Hy6 ensures that photographers can use the latest imaging technologies without being tied to a specific system. This flexibility allows artists to choose the digital back that best suits their workflow, whether they prefer CCD or CMOS sensors.

The camera boasts an impressive modular system which allows users to interchange various components. The camera body can be paired with different viewing platforms, including a waist-level viewfinder or an eye-level finder, catering to various shooting styles. Additionally, users can easily change lenses, supporting a variety of focal lengths including wide-angle, standard, and telephoto options. This modularity not only enhances functionality but also enables users to customize their kit according to specific projects or personal preferences.

Moreover, the Sinar Hy6 incorporates cutting-edge technologies such as an electronic shutter which facilitates silent operation, making it particularly suitable for sensitive environments. This electronic shutter can also synchronize with flash at high speeds, allowing for greater creative possibilities in studio and outdoor settings. The camera’s precise metering system aids photographers in achieving accurate exposures, even in challenging lighting conditions.

Another notable characteristic of the Sinar Hy6 is its ability to capture stunningly detailed images with a wide dynamic range. The medium format sensor produces high-resolution files that are ideal for large prints and detailed editing, ensuring that photographers achieve the desired quality for professional work. The camera also supports advanced imaging techniques, such as focus stacking, which is particularly useful in product photography and macro work.

In conclusion, the Sinar Hy6 represents a blend of innovation, flexibility, and high-quality performance in the medium format landscape. Its modular design, compatibility with various digital backs, and advanced imaging technologies make it a powerful tool for professionals seeking exceptional results in their photography endeavors. Whether in the studio or on location, the Hy6 stands out as a versatile option for capturing stunning images.
Top Page Image Contents